- ページ 7
オーブン KitchenAid KEBS278SBL04のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。KitchenAid KEBS278SBL04 16 ページ。 7" (68.6 cm) and 30" (76.2 cm) electric single and double built-in oven
KitchenAid KEBS278SBL04 にも： パーツリスト (7 ページ)
ページを印刷する
2,
3,
4.
5,
Push against seal area of front frame to push oven into
cabinet.
Push oven completely into cabinet and center oven into
cabinet cutout.
Securely fasten oven to cabinet using the #8-14 x 1" screws
(2 for single oven, 4 for double oven) provided. Insert the
screws through holes in mounting rails. Do not overtighten
screws.
o
7
A. Mounting rail
B. Insert #8-14 x 1" screw.
On some models, the oven vent is taped to the side of the
oven.
With one #8-14 x %" screw for each side of the vent, fasten
vent securely to the oven.
A
B
A. #8-14 x %" screw
B. Oven vent
6. Replace oven racks.
7. Replace oven door by inserting ends of hinges into hinge
slots in the oven frame.
8. Push hinges in as far as they will go and open the oven door.
You should feel the oven door drop into place.
9. Rotate both hinge latches back to the locked position.
10. Check that the door is free to open and close. If it is not,
repeat the removal
and installation procedures. See
"Remove Oven Door" section.
11. Repeat for lower oven door.
12. Reconnect power.
13. Display panel will light briefly, and "PF" should appear in the
display.
14. If display panel does not light, please reference the
"Assistance
or Service" section of the Use and Care Guide or
contact the dealer from whom you purchased your oven.
,.,,. p,:l.
Insk ll ,ion
I.
Check that all parts are now installed.
If there is an extra part,
go back through the steps to see which step was skipped.
2. Check that you have all of your tools.
3. Dispose of/recycle all packaging materials.
4. For oven use and cleaning, read the Use and Care Guide.
Check
Operation
of Single Oven
1. Turn power on.
2. When "CLOCK ENTER TIME" appears touch START,
3. Touch BROIL.
4. Touch START.
If oven(s) does not operate,
check the following:
•
Household fuse is intact and tight; or circuit breaker has
not tripped.
•
Electrical supply is connected.
•
See "Troubleshooting"
section in the Use and Care Guide.
5. When oven has been on for 5 minutes, feel for heat.
If you do not feel heat or if an error code ("F" followed by a
number plus "E" followed by a number) appears in the
display, turn off the oven and contact a qualified technician.
6. Touch OFR
Check Operation of Double Oven
1. Turn power on.
2. When "CLOCK ENTER TIME" appears touch START.
3. Touch UPPER OVEN or LOWER OVEN, to select the oven
you are testing.
4. Repeat "Check Operation of Single Oven" steps 2-6.
To set the clock and other oven functions,
refer to the Use and
Care Guide.
If you need Assistance
or Service:
Please reference the "Assistance or Service" section of the Use
and Care Guide or contact the dealer from whom you purchased
your built-in oven.