- ページ 8

ネットワーク・ハードウェア HIKVISION DS-7608NI-I2/8PのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION DS-7608NI-I2/8P 17 ページ。

S E T U P H I K - C O N N E C T P 2 P C L O U D S E R V I C E ( c o n t i n u e d )

To see a device's video stream on the Hik-Connect or iVMS-4500 mobile app, add the device.

A D D I P C A M E R A S

Right click a window in Live View mode to display the menu.

Click Menu to display Menu choices.

Click Cameras Setup to display the Add Cameras window.

Add camera(s) as follows:

 Hikvision Camera Connected to Unit's PoE Port — Will automatically be added to an NVR

camera channel (D

 Hikvision Camera Connected to the Network but Not Unit's PoE Ports — Will automatically be

detected and displayed at bottom of the camera list in yellow. Must be added to an NVR camera

channel manually:

1) Click an unused camera channel's D

2) Click the EDIT (Pencil) button to display the Edit IP Camera window.

3) Use pull-down menu to change Adding Method from "Plug and Play" to "Manual."

4) Enter the camera's IP address and other information as required.

On the Home screen, click the "+" button (upper right corner).

Enter the device's information.

 If you have the device's QR Code: Use the QR Code Scanner to scan the device's QR Code.

 If you do not have the device's QR Code: Enter the device information manually:

a. Click the Edit (pencil) icon on top right corner.

b. Enter device serial number (device must be online), then click the OK button.

c. When the device appears on the "Results" screen, click the Add button.

d. Enter device's 6-character Verification Code (all upper case), then click the OK button.

e. Click the Finish button.

) and will be visible on the camera list in white within two minutes.

checkbox.