- ページ 3

芝刈り機 Gardena 300 CのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena 300 C 8 ページ。 Cylinder lawnmower

Gardena 300 C 取扱説明書
Do not use the lawnmower while people,
especially children, or animals are nearby.
The operator is liable for damages.
The safety distance between the blade
cylinder and the operator that is created
by the guiding spar is to be always
maintained.
When mowing embankments and slopes,
special care must be taken:
v Make sure you always keep a safe
distance and wear shoes with a non-
slip sole.

3. Assembly

6
z
m
3
4
2
5
7

4. Operation

Mowing correctly :
1. Insert lower part of bottom upright
into upright holders
secure with the screws
2. Push connector
into upper part of bottom upright
3. Insert threaded rod
through lower parts of central
5
3
upright
, upper part of bottom
1
upright
and connector
up to the stop.
1
4. Slide threaded bearing
clamping lever
5. Screw clamping lever
threaded rod
6. Move clamping lever
2
connector
clamping lever
7. If clamping lever
screw another turn onto threaded rod
4
. Repeat procedure until clamping
5
lever
locks on connector
8 Firmly attach bottom part of top
6
upright
to upper parts of central
3
upright
using 2 wing nuts
To produce a well-maintained lawn we recommend cutting the
lawn regularly once a week if possible. The lawn becomes thicker
if cut frequently.
Relatively long cut grass (> 1 cm) must be removed so that the
lawn does not become yellow and matted.
Always cut diagonally to the slope.
Take special care when moving backwards
and when pulling the lawn mower. Danger
of stumbling !
If the cutting tools or the lawnmower run into
an obstruction and / or solid objects, the lawn
mower should be properly and thoroughly
inspected.
v Only work when visibility is good.
Never leave the lawnmower unattended.
If your work is interrupted, store the mower
in a safe place.
1
a
up to stop and
z
s
.
2
from underneath
1
.
4
from left
2
right
7
into
5
.
5
onto
4
approx. 4 turns.
5
onto
and check whether
5
locks.
5
does not yet lock,
2
.
z
m
.
1
a
z
S
4
5
2
5
9