- ページ 9

IP電話 Avaya 5600 SeriesのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Avaya 5600 Series 17 ページ。 Gigabit, ip phones
Avaya 5600 Series にも：設置および安全に関する指示 (11 ページ), クイック・インストール・マニュアル (2 ページ), インストレーション・ジョブ・エイド (14 ページ), 製品情報 (2 ページ)

4550T-1 Step 3 – Configure a Layer-2 classifier and classifier element to select all ingress traffic

4550T-1(config)# qos l2-element 1

4550T-1(config)# qos classifier 1 set-id 1 name all_traffic element-type l2 element-id

4550T-1 Step 4 – Add a policy and apply the QoS action to the interface group configured above

for all the access port members

4550T-1(config)# qos policy 1 name fwd_port_27 if-group pri_vlan clfr-type classifier

clfr-id 1 in-profile-action 10 precedence 6

Please note the ERS4500 series support up to 7 policy precedence levels. By default, you can

only select a precedence level as high as 6 unless DHCP Relay is globally disabled. Hence, if



you will never use DHCP Relay, you can disable DHCP Relay globally using the CLI command

no ip dhcp-relay which in turn will allow you to use precedence level 7.

Use the CLI command show qos diag to view the total filter resources used and available.

July 2010

Private VLAN Edge Technical Configuration Guide

avaya.com