- ページ 6

芝刈り機 Gardena 4038のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena 4038 13 ページ。 Electric flexible steerable lawnmower

Gardena 4038 取扱説明書
Adjusting the cutting height :
z
H
Mowing on a slope :
H
Mowing with the grass box :
M
8
16
For 38 E :
The cutting height can be adjusted centrally from 2 to 7 cm in
1 cm-stages (6 positions).
I
1. Hold handle
2. Set the cutting height required by raising or lowering the mower.
The cutting height set is displayed on the cutting height
J
display
3. Select cutting height and release the button
The cutting height engages automatically.
To prevent sliding sideways on a slope, the front
A
wheels and the steering wheel must be locked in the
K
straight ahead position before pushing the mower on
to the slope.
Do not use the mower on a slope steeper than 20 ° maximum.
1. Turn both red running wheel locks
of travel).
2. Bring front wheels
4
K
lock
The wheels are locked in the straight ahead position.
L
3. Lift steering wheel lock
4. Bring steering wheel
the lock engages.
The steering wheel is locked in the straight ahead position.
After mowing on the slope has been completed, the front wheels
and the steering wheel can be unlocked again by turning the
running wheel lock
L
lock
downwards.
When mowing slopes, cut in lines across the slope.
The grass box must be emptied as soon as grass is left lying
on the lawn.
DANGER ! Foreign bodies thrown out of the mower
A
can cause injuries!
V Only lift protective flap with the motor switched
off and the cutting tool stationary.
TIP : If the handle is tilted to the side, it is easier to empty the
N
grass box.
1. Lift protective flap
2. Empty the grass box
O
mounting hook
38 E Level Indicator :
The red level indicator
box. After starting the mower, the level indicator move upwards.
Stop immediately when the level indicator goes downwards
during mowing.
The grass box is full and must be emptied.
I
and press button
z
in cm.
H
4
into straight ahead position until the
engages.
L
upwards.
H
into the straight ahead position until
K
by 90° and folding the steering wheel
M
and take out grass box
8
and hang it on the back again using the
N
on the casing.
O
is located in the cover of the grass
J
.
J
again.
K
by 90 ° (groove in direction
8
by the handle.