- ページ 6
芝刈り機 Gardena 5041-20のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena 5041-20 10 ページ。 Battery lawnmower
Gardena 5041-20 にも： 取扱説明書 (17 ページ), 取扱説明書 (10 ページ)
ページを印刷する
When the charging control lamp
the battery is completely charged
(charging time, see 7. TECHNICAL DATA).
4. Examine the charge status regularly while you charge.
(B)
5. When the battery
is completely charged, disconnect the battery
from the charger
(C)
.
6. Disconnect the charger
(C)
from the mains.
Battery charging indicator [ Fig. O2 ]:
Battery charging indicator during charging:
100 % charged
66 – 99 % charged
33 – 65 % charged
0 – 32 % charged
Battery charging indicator during operation:
v Push the button
y
on the battery.
66 – 99 % charged
33 – 65 % charged
11 – 32 % charged
0 – 10 % charged
Control panel [ Fig. O3 ]:
Start button:
Push the Start button
(s)
on the panel.
activated
automatic deactivation
Eco button:
Push the Eco button
(e)
on the panel.
activated
normal mode
Eco mode
Normal operation or Eco mode
Under high loads, the motor speed increases automatically to ensure the
best possible mowing results at all times.
Battery charging indicator during operation:2
ß
v Push the button
on the control panel.
b2
(The LEDs illuminate 5 seconds later).
76 – 100 % charged
51 – 75 % charged
26 – 50 % charged
6 – 25 % charged
0 –
5 % charged
To start the mower [ Fig. O4 / O5 / O6 ]:
DANGER! Risk of injury!
Risk of injury if the product does not stop when you
release the start lever.
v Do not bypass the safety devices or switches. For example do
not attach the start lever
(12)
To start:
The product is fitted with a two-handed safety device (start lever
with safety interlock
(13)
) to prevent the product from being turned
on by accident.
(14)
1. Open the lid
.
(B)
2. Put the battery
into the product.
3. Put the safety key
(15)
into the product and turn to position 1.
4. Push the start button
(s)
on the panel.
The start-LED lits green.
(13)
5. Push the safety interlock
with one hand and pull the start lever
with the other hand.
(13)
6. Release the safety interlock
The product will start.
To stop:
1. Release the start lever
(12)
.
(s)
2. Push the start button
on the panel.
The start LED is off.
3. Turn the safety key
(15)
to positon 0 and remove it.
(Lc)
at the charger illuminates green
«
∑
€
,
and
illuminate
«
∑
€
and
illuminate,
flashes
«
∑
illuminates,
flashes
«
flashes
«
,
∑
and
€
illuminate
«
and
∑
illuminate
«
illuminates
«
flashes
(Ls)
lit green
after 10 minutes without use
(Le)
lit green
3100 rpm no load
2700 rpm no load
3700 rpm high load over 12 A
ß
ß
ß
ß
,
,
and
illuminate
La
Lb
Lc
Ld
ß
ß
ß
,
and
illuminate
La
Lb
Lc
ß
ß
and
illuminate
La
Lb
ß
illuminates
La
ß
flashes
La
to the handle.
.
To adjust the cutting height [ Fig. O7 ]:
The cutting height can be adjusted from 25 to 75 mm in 10 positions.
1. Move the adjust lever
2. Turn the adjust lever
(B)
3. Release the adjust lever
To use the mower with the grass box [ Fig. 8 ]:
DANGER! Risk of injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, remove the safety key and use
gloves before you open the protective flap
v Do not put your hands in the discharge opening.
1. Lift the protective flap
2. Put the grass box into the product by the handle
3. Make sure that the grass box is securely connected.
4. Start the product.
5. Stop the product when the grass box is filled.
6. Lift the protective flap
7. Remove the grass box of the product by the handle
8. Empty the grass box.
To use the mower without the grass box [ Fig. 8 ]:
For larger areas of grass where grass collection is not required you can
use the product without the grass box. When the protective flap
closed the cut grass drop on the lawn.
1. Lift the protective flap
2. Remove the grass box of the product by the handle
3. Release the protective flap
When the protective flap is released, it closes automatically and covers
the discharge opening.
Tips to use the mower:
If grass residue is left in the discharge opening, pull the mower backwards
about 1 m so that the grass residue can drop out downwards.
To produce a well-maintained lawn, we recommend to cut the lawn
regularly once a week if possible. The lawn becomes denser if you cut it
frequently.
After relatively long cutting intervals (holiday lawn), first of all cut in one
direction with the highest cutting height and then cut in the crosswise
direction with the required cutting height.
If possible, only cut the grass when it is dry, if the grass is damp, the
cutting pattern will be uneven.
Cutting performance and battery charge:
The lawn area which can be cut on each battery charge depends on
several factors such as moisture, grass density and cutting height. In order
to ensure an optimal use of space, do not turn the mower on and off too
frequently as this severely reduces the battery running time. The cutting
performance for each battery charge can be ideally utilised by increasing
the cutting height and frequent mowing.
4. MAINTENANCE
(12)
DANGER! Risk of injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, remove the safety key and use
gloves before you do maintenance.
(12)
To clean the product:
DANGER! Risk of injury!
Risk of injury and risk of damage to the product.
v Do not clean the product with water or with a water jet
(in particular high-pressure water jet).
v Do not clean with chemicals including petrol or solvents.
Some can destroy critical plastic parts.
The airflow slots must always be clean.
(17)
to the wheel.
(17)
to adjust the cutting height.
(17)
in the new positon.
(18)
.
(18)
.
(7)
.
(18)
.
(7)
(18)
.
(7)
(18)
.
.
(18)
is
.
11