- ページ 6
IP電話 Avaya Definity 6408のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avaya Definity 6408 17 ページ。 6400 series, multi-line voice terminal
Avaya Definity 6408 にも： クイック・リファレンス・カード (6 ページ), ユーザーマニュアル (14 ページ), ユーザーマニュアル (2 ページ)
ページを印刷する
Ringing tones are produced by an incoming call. Feedback tones are those which you hear through the
handset or the speaker.
Ringing Tones
• 1 ring - A call from another extension.
• 2 rings - A call from outside or from the attendant.
• 3 rings - A priority call from another extension, or from an Automatic Callback call you
placed.
• ring-ping (half ring) - A call redirected from your telephone to another because Send All
Calls or Call Forwarding All Calls is active.
Feedback Tones
• busy signal - A low-pitched tone repeated 60 times a minute; indicates the number dialed is
in use.
• call waiting ringback tone - A ringback tone with lower-pitched signal at the end; indicates
the extension call is busy, and the called party has been given a call waiting tone. If you hear
this tone, you may wish to activate Automatic Callback.
• confirmation tone - Three short bursts of tone; indicates a feature activation or cancellation
has been accepted.
• coverage tone - One short burst of tone; indicates your call will be sent to another extension
to be answered by a covering user.
• dial tone - A continuous tone; indicates dialing can begin.
• intercept/time-out tone - An alternating high and low tone; indicates a dialing error, a denial
of the service requested, or a failure to dial within a preset interval (usually 10 seconds) after
lifting the handset or dialing the previous digit.
• recall dial tone - Three short bursts of tone followed by a steady dial tone; indicates the
feature request has been accepted and dialing can begin.
• reorder tone - A fast busy tone repeated 120 times a minute; indicates all trunks are busy.
• ringback tone - A low-pitched tone repeated 15 times a minute; indicates the telephone
dialed is being rung.
Page 5