プリンター Lexmark C950 SeriesのPDF 印刷欠陥マニュアルをオンラインで閲覧またはダウンロードできます。Lexmark C950 Series 1 ページ。 Lexmark c950 printer - print defects guide
Lexmark C950 Series にも：接続マニュアル (7 ページ), セットアップマニュアル (2 ページ), マニュアル (13 ページ), ペーパーマニュアル (3 ページ), メニューマップ (2 ページ), 引越しマニュアル (2 ページ), 情報マニュアル (1 ページ)

Print defects guide

Page 1 of 1

Print defects guide

Repeating defects measurements

Match a set of repeating defects on a print job to the marks on one of the vertical lines to determine whether a photoconductor

unit is defective. The color of the repeating print defects indicates which photoconductor unit is causing the defect.

Note: Make sure the current selection in the printer for Scale to Fit in the PDF menu is set to No for the rulers to be printed at

the correct size.

Change the photoconductor unit if the repeating defects appear in these instances:

Every 94.2 mm (3.71 in.) of the page

Every 37.68 mm (1.48 in.) of the page

Every 31.4 mm (1.24 in.) of the page

Note: The printer has four photoconductor units. Replace the photoconductor unit that has the same color as the repeating print

defect.