- ページ 3

水ポンプ Gardena 11000 SL automaticのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena 11000 SL automatic 10 ページ。 Submersible pump

ページを印刷する

2. For Your Safety

Residual-current device

In Austria

In Switzerland

Mains power

Visual check

Manual operation

Notes on use

According to DIN VDE (German Electrical Engineers' Associa-

tion) 0100, submersible pumps may only be used in swimming

pools, garden ponds, and fountains if the pump is operated via a

residual-current device with a residual-current rating of ≤ 30 mA.

The pump must not be operated when there are persons in the

swimming pool or garden pond.

For safety reasons we recommend that you always operate

the submersible pump via a residual-current device (DIN VDE

0100-702 and 0100-738).

v Please contact your electrician.

In Austria, according to ÖVE B / EN 60 555 part 1 to 3, pumps

which are used in swimming pools and garden ponds, and

equipped with firm power cable should be fed via an ÖVE

approved isolating transformer – rated voltage must not exceed

230 V.

In Switzerland mobile appliances which are used outdoors,

must be connected via a residual-current device.

According to DIN VDE (German Electrical Engineers' Associa-

tion) 0620, mains power cables must not have a smaller cross-

section than the rubber-sheathed cables of the designation

H07 RNF. The cable length must be at least 10 m.

Data indicated on the type plate must match technical data of

the mains supply.

v Take care that the electrical connections are made within dry

area, protected from flooding.

Protect plug and power cable from heat, oil and sharp edges.

v Don't use the power cable for plugging off.

The power cable or the float switch must not be used for mount-

ing or relocating the pump. For submerging or lifting / securing

the pump, fix a rope to the pump's carrying handle.

Extension cables must meet the requirements of DIN VDE 0620.

v Before operating the pump, first make a visual check, if there

is any damage of the pump (esp. regarding power cable and

plug).

v Observe the minimum water level and the max. delivery

height (see 8. Technical Data).

A damaged pump must not be used.

v In case of damage, please have the pump checked by our

GARDENA Service Centre.

During manual operation, the pump must be switched off as

soon as all the liquid has been pumped away.

v Observe the pump at all times during manual operation.

In as-delivered condition, the rotating feet are set to draining

in the flat position (1 mm).

v Turn the rotating feet by 180° to 5 mm for normal operation.

The pump is raised by 5 mm.