- ページ 12

プリンター Lexmark Color LaserのPDF 管理者マニュアルをオンラインで閲覧またはダウンロードできます。Lexmark Color Laser 20 ページ。 Finisher setup guide
Lexmark Color Laser にも: 接続マニュアル (5 ページ), ジャム除去マニュアル (2 ページ), ジャム除去マニュアル (2 ページ), 接続マニュアル (6 ページ), セットアップ (2 ページ), 管理者マニュアル (12 ページ), 接続マニュアル (7 ページ), リリースノート (4 ページ), セットアップマニュアル (2 ページ)

Lexmark Color Laser 管理者マニュアル
Using the Embedded Web Server
Click Restore Defaults to return all fields to factory default settings.
Click Reset to cancel changes to all fields and begin again.
Click Apply to save changes to the profile.
Note: Reset and Apply are the only options available on certain devices.
Using MarkVision Professional
Click OK to save changes.
Click Cancel to exit without making changes.

Scheduling energy-saving tasks

Note: This option is available only in printers that support the Embedded Solutions Framework (eSF) 3.0.
1
Access the application configuration settings from the Embedded Web Server.
2
From the Scheduled Power Modes section, click Add.
The Add Schedule Power Modes page appears.
3
In the Event Name field, type a descriptive name for the task.
4
From the Power Mode list, select an energy-saving task.
5
From the Time field, select the hour of day for the printer to perform the energy-saving task.
6
From the Day(s) field, select the day of the week or the span of days for the printer to perform the energy-saving
task.
7
Do one of the following:
Using the Embedded Web Server
Click Restore Defaults to return all fields to factory default settings.
Click Reset to cancel changes to all fields and begin again.
Click Apply to save changes to the profile.
Note: Reset and Apply are the only options available on certain devices.
Using MarkVision Professional
Click OK to save changes.
Click Cancel to exit without making changes.

Configuring Eco-Settings using the printer control panel

Note: Make sure the Lock UI option is not selected in the application configuration settings for you to configure
Eco-Settings from the printer control panel.
1
From the home screen, touch the application icon.
2
Adjust the settings as necessary.
3
After all Eco-Settings are configured, touch Submit or OK.
Configuring the application
12