- ページ 4

水ポンプ Gardena 1500/1のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena 1500/1 11 ページ。 Battery pump

ページを印刷する

Setting up the telescopic

pipe on the container:

Complete Solution:

(a) the GARDENA Rain Water

Collection Filter (Art. No.

3820 / 3821)

(b) the GARDENA Connecting

Set (Art. No. 3815),

Tank (Art. No. 3801 / 3805)

(d) the matching GARDENA

Cover for Rain Water Tank

(Art. No. 3800 / 3804), and

(e) the GARDENA Battery Pump

(Art. No. 1498).

Use in shallow vessels:

4. Operating

Charging the battery:

1. Screw telescopic pipe

2. Release clamping sleeve

3. Adjust telescopic pipe stalk

the container. The length of the telescopic pipe

can be adjusted between 39 – 62 cm.

4. Tighten clamping sleeve

The length of the telescopic pipe

in such a way that the pump does not touch the

bottom of the container. This prevents dirt in the

container reaching the pump.

A rope must be run through the handle

pump for deeper water containers (max. 1.5 m).

If the battery pump is used in flat containers, e.g. to empty a

paddling pool, the telescopic pipe can be removed and replaced

by the threaded tap connector supplied. The 13 mm (1/2"),

16 mm (5/8") or 19 mm (3/4") hose connection must be set up

using Original GARDENA System hose connections.

The battery may only be charged using the NL-12 charger

supplied or the solar panel, Art. 7851-00.620.00 with charging

cable Art. 1498-20.600.22, obtainable from GARDENA Service.

Operating the pump is not possible during charging !

The battery is partially charged in the works for safety reasons.

The battery must be charged before it is used for the first time.

As this NiCd-battery is subject to self-discharging, the battery

must be charged up to reach a full charge if it has been stored for

a relatively long time.

on the pump.

of the telescopic pipe.

to the height of

by hand.

should be set

of the

Art. No. 3820/21

Art. No. 3815

Art. No. 380

1/3805

Art. No. 380

0/3804

Art. No. 1498