- ページ 9
水ポンプ Gardena 19080のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena 19080 18 ページ。 Smart automatic home & garden pump
Gardena 19080 にも： 取扱説明書 (9 ページ)
ページを印刷する
Disposal:
(in accordance with
RL2012/19/EC)
7. TROUBLESHOOTING
Before you do
troubleshooting:
To loosen the impeller:
To clean the flow sensor:
u
z
o
p
i
22
The product must not be added to normal household waste.
It must be disposed of in line with local environmental regulations.
IMPORTANT!
Make sure that the product is discarded through or via your
municipal recycling collection centre.
WARNING! Electric shock!
Risk of injury due to electric shock.
v Disconnect the product from the mains before you do
troubleshooting.
A blocked impeller can be loosened again.
1. Turn the motor shaft
This will loosen the blocked impeller.
t
2. Start the pump (see 4. OPERATION).
If the flow sensor is dirty, this may result in wrong error messages.
1. Loosen both screws
2. Remove the cover
3. Loosen the screw
4. Loosen the cap
5. Remove and clean the impeller
6. Clean the housing of the flow sensor.
7. Assemble the check valve again in reverse order.
8. First insert the cover
at the bottom.
a
t
with a screw driver.
z
.
u
.
i
and remove the clip
p
counterclockwise (e. g. with a screwdriver).
a
.
u
at the top and then tighten both screws
o
.
z