- ページ 4

水ポンプ Gardena 3000/4 ecoのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena 3000/4 eco 17 ページ。 Pressure tank unit
Gardena 3000/4 eco にも：取扱説明書 (10 ページ)

ページを印刷する

Warning! This unit makes an electromagnetic

field while it operates. This field may under

some con ditions interfere with active or pas-

sive medical implants. To decrease the risk of

conditions that can possibly injure or kill, we

recommend persons with medical implants to

speak with their physician and the medical

implant manufacturer before operating.

3. Initial Operation

Installing the

Pressure Tank Unit:

Fixed installation of the

Pressure Tank Unit:

Warning! Keep toddlers away when you

assemble the unit. Small parts can be easily

swallowed. There is also a risk that the poly-

bag can suffocate toddlers.

The installation position must be firm and dry, and permit a secure

mounting for the pressure tank unit.

v Install the Pressure Tank Unit at a safe distance from the

pumping medium.

The pump must be installed in a location with low air humidity and

sufficient ventilation in the area of the ventilation slots. It must be

at a distance of at least 5 cm from the walls. No dirt contamination

(e. g. sand or earth) may be sucked in through the ventilation slots.

v The Pressure Tank Unit can be screwed with all 4 feet

a solid surface

Alternatively, spring mounted feet (Art. 1753-00.901.00) for low

vibration and quiet running are available as accessories via the

GARDENA Service.

Install the pressure tank unit so that there is room to place

a suitably sized drainage tray under the drain screw

the unit or system to be drained.

If possible, install the unit higher than the surface of the water to

be pumped. If this is not possible, install a vacuum-resistant valve

between the unit and the suction hose, for example for cleaning

the integrated filter.

If the pump is permanently installed indoors for domestic water

supply, the Pressure Tank Unit should not be connected to the

domestic water pipework with rigid pipes but with flexible tubing,

to reduce noise and to avoid damage to the pump caused by

pressure blows.

If the system is being installed permanently, please fit suitable

valves on both the intake and delivery sides. This is important

e. g. for maintenance and cleaning work or if the system is being

shut down.

The connection pieces on the intake and delivery sides may

only be tightened by hand.

onto

to allow