- ページ 4

水ポンプ Gardena 3500/4 JetのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena 3500/4 Jet 12 ページ。 Garden pump

ページを印刷する

3. Initial Operation

Setting up your Garden Pump: The site must be firm and solid in order to ensure safe and sturdy

Connecting hose

to suction side:

Connection hose

to delivery side:

operating conditions for the pump.

➔ Position the pump at a safe distance (min. 2 m) from the liquid

to be pumped.

Don't use any hose connection system fittings on the suction side!

A vacuum-resistant suction hose must be used

• e.g. GARDENA Suction Unit, art. no. 1411.

In order to reduce the suction time, it is advisable to use a suction

hose with backflow preventer avoiding automatic draining of the

suction hose when the pump is stopped.

1. Screw a vacuum-resistant suction hose airtight onto the con-

nector

on the suction side of the pump

2. For suction heights exceeding 4 m also secure the suction

hose

(e.g. by fastening it to a wooden post).

This relieves the pump of the weight of the suction hose.

The two pumps 3000/4 Jet and 3500/4 Jet are equipped with

2 connections

connection k

connect 2 hoses.

The pump connections

thread which can be used to connect 13 mm (1/2"), 16 mm (5/8")

or 19 mm (3/4") hoses via the GARDENA hose connection system.

Best results regarding the delivery capacity of the pump are

achieved when connecting 19 mm (3/4") hoses in conjunction

with e.g.

• GARDENA Pump Connection Set, art. no. 1752,

or when using 25 mm (1") hoses with fittings available from your

sanitary dealer.

➔ Connect the pressure hose to the connector

side

With parallel connection of more than 2 (3000/3 Jet more than 1)

hoses/watering accessories we recommend the use of

• GARDENA Twin-Tap Connectors or Four-Channel Water

Distributors art. no. 1210/1194,

which can be screwed directly onto the connection on the

pressure side

/ k

on the pressure side. The rear pump

is closed with a cap that can be unscrewed to

/ k

are equipped with a 33.3 mm (G 1")

on the delivery