- ページ 8

換気フード KitchenAid KCDP 9050のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。KitchenAid KCDP 9050 16 ページ。

Installation

Fig. 4

• Using a pencil, draw a line on the wall up to the

ceiling that corresponds with the centre line;

this will make installation easier.

• Establish the most suitable distance from the

work surfaces according to your needs

(Important! Respect the minimum distances

indicated on p6 of this instruction booklet),

draw a horizontal line on the wall corresponding

to this distance and apply the perforation layout:

the vertical centre line printed on the

perforation layout should correspond with the

centre line drawn on the wall; furthermore the

lower edge of the perforation layout should

correspond with the horizontal line drawn.

• Place the lower support bracket on the

centre line

support

bracket

hooks

bottom fastener

locations Ø 8 mm

REAR VIEW

perforation layout making it coincide with the

sketched rectangle. Mark the two external holes

then drill the holes. Remove the perforation

layout and insert 2 wall plugs and fix the hood

support bracket with 2 x45mm screws.

Fig. 5

• Hang the hood on the lower bracket.

• Adjust the distance of the hood from the wall.

• Adjust the horizontal position of the hood.

• From the inside of the hood, make 2 pencil

marks for the holes ready for the final fitting of

the hood.

• Remove the hood from the lower bracket.

• Drill in the points indicated.

• Insert 2 wall plugs.

support

bracket

mounting height reference

FRONT VIEW

bottom screw hole

(inside the canopy)

hooks