- ページ 4

水ポンプ Gardena FSP 3500のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena FSP 3500 13 ページ。 Filter / stream pump
Gardena FSP 3500 にも：取扱説明書 (14 ページ)

ページを印刷する

7862-20.960.02_05.08.2008:GARDENA

4. Initial Operation

Connecting the hose s:

³⁄₄ "

1 "

1 ¹⁄₄ "

1 ¹⁄₂ "

FSP 3500

FSP 5500 Economic

FSP 8500 Economic

FSP 12000 Economic

FSP 16000 Economic

Switch Automatic Energy

Control (AEC) on :

Switch pump on :

05.08.2008

The universal connector

3500 only), 1 " , 1 ¹⁄₄ " and 1 ¹⁄₂ " hoses.

1 "

To achieve the best pumping results (maximum delivery rate of

the pump) use a 38 mm (1 ¹⁄₂ " )-hose. We recommend that you

secure all hoses using GARDENA Hose Clips art. no. 7192 /

7195.

1. Depending on the hose, cut away the parts of the universal

connector

Otherwise loss of performance could occur.

2. Screw universal connector

3. FSP 5500 - FSP 16000 : Pay attention that the O-ring

inserted correctly.

4. Connect hose to the universal connector

Only for FSP 12000 Economic / FSP 16000 Economic :

1. Undo screws

2. Press in snap fastening

3. Set switch

On = AEC switched on

Off = AEC switched off

4. Close the filter housing

place, if applicable.

If using a pond filter, separate the filter outlet and the pump by

as much distance as possible in the pond. This will achieve the

best possible cleaning effect for the pond water.

v Note the maximum submersion depth (see 9. Technical Data).

1. Place the pump in the water in such a way that the filter

housing

2. Plug mains plug into an AC socket.

Warning : Pump will start immediately.

For infinitely variable control of the flow rate and in case of 2 con-

nection points (e.g. simultaneous operation of stream and filter),

the GARDENA 2-way Regulator Valve Art. 7867

09:09

Seite 12

can be used to connect ³⁄₄ " (for FSP

you do not need using a saw.

onto the pump.

(transit support).

and open up the filter housing

to the position wanted On / Off.

and fit the screws

is covered by at least 20 cm of water.

back into

can be used.