- ページ 4

水ポンプ Gardena RP 600のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena RP 600 18 ページ。 Indoor fountain pump
Gardena RP 600 にも：取扱説明書 (20 ページ)

Mains power cables must not have a smaller

cross-section than a PVC cable of the

designation H03 VV (RP 420 of the

designation H05 RNF). Extension cables must

meet the requirements of DIN VDE 0620.

Data indicated on the type plate must match

technical data of the mains supply.

Please unplug the fountain pump after

operation and before carrying out any

maintenance works.

The fountain pump must not be operated

when there are people in the water.

Swimming pools and garden ponds should

be designed according to international and

national design regulations.

v Please consult a qualified electrician for

advice.

Before operating the fountain pump, look to

see if there is any damage to the fountain

pump (esp. regarding power cable and plug).

The connection cable of the pump cannot be

replaced. If the cable is damaged the pump

must be disposed of.

Do not use the power cable to carry the pump

or to pull the plug out of the socket.

Protect the power cable from heat, oil and

sharp edges.

For Austria :

Pumps for use in swimming pools and

ponds may only be operated via an isolating

transformer.

v Please consult a professional electrician.

For Switzerland :

In Switzerland mobile appliances which are

used outdoors must be connected via a

residual-current device.

User instructions :

Never let the pump run dry; running

dry generates heat and will damage

the pump.