- ページ 9

トリマー Gardena 8841のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena 8841 10 ページ。 Turbotrimmer
Gardena 8841 にも：取扱説明書 (14 ページ)

ページを印刷する

1. Maintenance

Replacing blades :

Fault

The Trimmer is not cutting

cleanly or not cutting at all

Charging indicator lamp does

not light up

Charging indicator lamp

flashes for more than

1 hour

The battery can no longer

be charged

In the event of other faults please contact GARDENA Service.

Repairs should only be carried out by GARDENA service centres or dealers

authorised by GARDENA.

9. Accessories

GARDENA Spare Blades

GARDENA Replacement Battery

GARDENA Additional wheel

Only use original GARDENA Spare Blades. Spare blades

are available from your GARDENA dealer or direct from

GARDENA Service.

• GARDENA Spare Blades for Turbotrimmer

AccuCut 400 Li / AccuCut 450 Li

Remove blade :

1. Turn Trimmer round and place on rubber pad of handle.

2. Press end of blade down slightly (A), slide blade

through blade carrier

Fit blade :

v Slide new blade

carrier

until it snaps into place.

When the new blade is correctly inserted, it can be moved

more easily.

Possible cause

Blade worn or too short.

Blade broken off.

Battery is flat.

Battery charger or charging cable v Plug in battery charger and

not plugged in properly.

A fault has occurred.

If this does not eliminate the fault, please contact

GARDENA Service.

Battery is defective.

Only the original GARDENA Replacement Battery 18 V

(Art. No. 8839) may be used. This can be obtained from your

GARDENA dealer or directly from GARDENA Service.

for AccuCut 400 Li

(B) and pull out.

from inside through slot in metal of blade

Remedy

v Replace blade.

v Charge battery.

charging cable properly.

v Unplug and reinsert

charging cable. The fault

will be reset.

v Replace the battery

(Art. No. 8839).

Art. No. 5368

Art. No. 8839

Art. No. 5310

Art. No. 5368

inside