- ページ 5

換気フード KitchenAid KVWB400DSS4のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。KitchenAid KVWB400DSS4 16 ページ。 30" (76.2 cm) and 36" (91.4 cm) wall-mount canopy range hood

ページを印刷する

Product Dimensions

7¹⁄₄"

(18.3 cm)

(20.7 cm)

30" (76.2 cm) or

36" (91.4 cm)

* For non-vented (recirculating) installations

** For vented installations

Cabinet Dimensions

7¹⁄₄" (18.4 cm)

6⁵⁄₈" (16.8 cm)

7³⁄₈" (18.8 cm)

Side

cabinet

30" (76.2 cm) or

36" (91.4 cm)

"X"

bottom of

canopy

to cooking

surface

* For non-vented (recirculating) installations

IMPORTANT:

Minimum distance "X": 24" (61.0 cm) from

electric cooking surface.

Minimum distance "X": 27" (68.6 cm) from

gas cooking surfaces.

Suggested maximum distance "X": 36" (91.4 cm)

8¹⁄₈"

*28⁷⁄₈" (72.6 cm) min.

42¹⁄₁₆" (106.9 cm) max.

**28³⁄₈" (72.0 cm) min.

38" (96.6 cm) max.

14¹⁄₈"

(35.9 cm)

10"

(25.4 cm)

20" (50.8 cm)

1¹ ₂" (4.0 cm)

2" (5.1 cm) min.

6" (15.2 cm) min.*

Vent and power

supply cable

entry location

15" (38.1 cm)

Side

cabinet

Centerline

Cooking surface

The chimneys can be adjusted for different ceiling heights. See

the following chart.

Vented Installations

Min. ceiling height

Electric cooking

7' 5" (2.26 m)

surface

Gas cooking

7' 8" (2.34 m)

surface

Non-vented (recirculating) Installations

Min. ceiling height

Electric cooking

7' 5" (2.26 m)

surface

Gas cooking

7' 8" (2.34 m)

surface

NOTE: The range hood chimneys are adjustable and designed to

meet varying ceiling or soffit heights, depending on the distance

"X" between the bottom of the range hood and the cooking

surface. For higher ceilings, a Stainless Steel Chimney Extension

Kit Part Number W10337357 is available from your dealer or an

authorized parts distributor. The chimney extension replaces the

upper chimney shipped with the range hood.

Venting Requirements

(venting models only)

Vent system must terminate to the outdoors, except for non-

■

vented (recirculating) installations.

Do not terminate the vent system in an attic or other

■

enclosed area.

Do not use 4" (10.2 cm) laundry-type wall cap.

■

Use metal vent only. Rigid metal vent is recommended.

■

Plastic or metal foil vent is not recommended.

The length of vent system and number of elbows should be

■

kept to a minimum to provide efficient performance.

For the most efficient and quiet operation:

Use no more than three 90° elbows.

■

Make sure there is a minimum of 24" (61 cm) of straight vent

■

between the elbows if more than 1 elbow is used.

Do not install 2 elbows together.

■

Use clamps to seal all joints in the vent system.

■

The vent system must have a damper. If the roof or wall

■

cap has a damper, do not use the damper supplied with the

range hood.

Use caulking to seal exterior wall or roof opening around the

■

cap.

The size of the vent should be uniform.

■

Cold Weather Installations:

An additional backdraft damper should be installed to minimize

backward cold air flow and a thermal break should be installed

to minimize conduction of outside temperatures as part of the

vent system. The damper should be on the cold air side of the

thermal break.

The break should be as close as possible to where the vent

system enters the heated portion of the house.

Makeup Air:

Local building codes may require the use of makeup air systems

when using ventilation systems greater than specified CFM of

air movement. The specified CFM varies from locale to locale.

Consult your HVAC professional for specific requirements in

your area.

Max. ceiling height

9' 2" (2.79 m)

Max. ceiling height

9' 6" (2.9 m)