- ページ 7

トリマー Gardena ComfortCut Li-18/23のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena ComfortCut Li-18/23 11 ページ。 Battery trimmer

ページを印刷する

2. Clean all movable parts after each operation. Especially remove any

grass and dirt from the protective cover

To clean the battery and the battery charger:

Make sure that the surface and the contacts of the battery and the battery

charger always are clean and dry before you connect the battery charger.

Do not use running water.

v Clean the contacts and the plastic parts with a soft and dry cloth.

5. STORAGE

To put into storage:

The product must be stored away from children.

1. Remove the battery.

2. Charge the battery.

3. Clean the trimmer, the battery and the battery charger

(see 4. MAINTENANCE).

4. Store the trimmer, the battery and the battery charger in a dry,

enclosed and frost-free place.

Disposal:

(in accordance with RL2012/19/EC)

The product must not be disposed of to normal household waste.

It must be disposed of in line with local environmental regulations.

IMPORTANT!

v Dispose of the product through or via your municipal recycling

collection centre.

Disposal of the battery:

The GARDENA battery contains lithium-ion cells that should

not be disposed of with normal household waste at the end of

its life.

IMPORTANT!

v Dispose of the batteries through or via your municipal recycling

collection centre.

1. Discharge the lithium-ion cells completely (contact the GARDENA

Service).

2. Protect the contacts on the lithium-ion cells against short circuits.

3. Dispose of the lithium-ion cells properly.

6. TROUBLESHOOTING

DANGER! Risk of injury!

Cut injury when the product starts accidentally.

v Wait for the plastic blade to stop and remove the battery

before you troubleshoot the product.

To replace the plastic blade [ Fig. T1 / T2 ]:

DANGER! Risk of cutting injuries!

v Do not use metal cutting elements or spare parts and

accessories not intended for use by GARDENA.

If the wear rib

(19)

is no longer visible, the blade carrier

replaced. Contact the GARDENA Service.

The plastic blades may only become worn to half the original

length at most. Only use original GARDENA Spare Blades

RotorCut. Spare plastic blades are available from your GARDENA

dealer or direct from GARDENA Service.

• GARDENA Spare Blades RotorCut for Turbotrimmer Art. 5368

To remove the plastic blade:

1. Turn the trimmer over.

2. Push the end of the plastic blade down slightly (A), slide the plastic

blade

(8)

inside through the blade carrier

To insert the plastic blade:

v Slide the new plastic blade

(8)

the blade carrier

(18)

until it audibly engages (click).

When the new plastic blade is correctly inserted, it can be moved more

easily.

(2)

(21)

must be

(18)

(B) and pull out.

from inside through the slot in metal of

Problem

Trimmer is not cutting

cleanly or not cutting at all

Trimmer vibrates severely

Trimmer does not start

Trimmer can no longer

be stopped

Error-LED

on the battery

flashes [ Fig. O3 ]

Error-LED

on the battery

illuminates [ Fig. O3 ]

(Lc)

Charging control lamp

on the charger does not

illuminate [ Fig. T3 ]

(Lc)

Charging control lamp

on the charger flashes red

[ Fig. T3 ]

Li-ion

NOTE: For any other malfunctions please contact the GARDENA service depart-

ment. Repairs must only be done by GARDENA service departments or specialist

dealers approved by GARDENA.

7. TECHNICAL DATA

Battery Trimmer

Rated current

Rated voltage

Cutting width

Rpm of blade carrier

Weight (without Battery)

Sound pressure level L

Uncertainty k

Sound power level L

measured/guaranteed

Uncertainty k

Hand/arm vibration a

vhw

Uncertainty k

Measuring process complying with:

NOTE: The stated vibration emission value has been measured according to

a standardized test procedure and can be used for comparison of one electric

power tool with another. It can also be used for preliminary evaluation of

exposure. The vibration emission value can vary during actual use of the electric power

tool.

System Battery BLi-18

Battery voltage

Battery capacity

Number of cells (Li-Ion)

Battery charging time

80 % / 100 % (approx.)

Appropriate GARDENA System Batteries BLi-18: Art. 9839 / 9865 / 9866 / 9867

Battery Charger 18 V

Mains voltage

Mains frequency

Rated Power

Possible Cause

Remedy

Plastic blade is worn or too

v Replace the plastic blade.

short.

Plastic blade is broken off.

v Replace the plastic blade.

Plastic blade is excessively

v Replace the plastic blade.

worn and creates an unbalance.

Blade carrier is worn.

v Replace the blade carrier.

Battery is not put completely

v Put the battery completely

into the battery holder.

into the battery holder until it

audibly engages.

Battery is empty.

v Charge the battery.

Engine is blocked.

v Remove the obstacle.

Start again.

Start lever is stuck.

v Remove the battery and

loosen the start lever.

Battery overload.

v Let the battery cool down and

start the trimmer again.

Under voltage.

v Charge the battery.

Battery temperature is out

v Use the battery in surround-

of range.

ings where temperatures are

between 0 °C and 40 °C.

Battery error /

v If the battery cannot be

battery defective.

reset by connecting it to

the charger, contact the

GARDENA Service.

Battery charger or charging

v Connect the battery charger

cable are not connected

and charging cable correctly.

correctly.

Battery temperature is out of

v Use the battery in surround-

range.

ings where temperatures are

between 0 °C and 40 °C.

Unit

Value (Art. 9876)

Value (Art. 9878)

2.3

V (DC)

R/min.

9500

2.0

2.1

dB (A)

2.5

83 / 85

86 / 88

dB (A)

1.6

1.8

< 2.5

m/s

1.5

EN 50636-2-91

RL 2000/14/EC

Unit

Value (Art. 9839)

Value (Art. 9865)

V (DC)

2.6

2.0

3.5 / 5

2 / 2.5

Unit

Value (Art. 9825-00.630.00)

V (AC)

100 – 240

50 – 60