Paper size
Dimensions
Other Envelope
216 x 356 mm
(8.5 x 14 in.)
1
A6 is supported only for grain long papers.
2
This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software application.
3
If a paper size you want to use is not listed, configure a Universal paper size. For more information, see "Configuring Universal
paper settings" on page 3.
Paper capacities
The capacities of the trays and the multipurpose feeder are based on 75 g/m
Load up to
Tray 1
250 sheets of paper
150 sheets of A6-size paper
50 paper labels
50 transparencies
Tray 2
250 or 550 sheets of paper
50 paper labels
Multipurpose feeder
50 sheets of paper
15 paper labels
10 transparencies
10 sheets of card stock
7 envelopes
Configuring Universal paper settings
The Universal Paper Size is a user-defined setting that lets you print on paper sizes that are not preset in the printer menus.
Set the Paper Size for the specified tray to Universal when the size you want is not available from the Paper Size menu. Then,
specify all of the following Universal size settings for your paper:
•
Units of measure (inches or millimeters)
•
Portrait Height and Portrait Width
•
Feed Direction
Note: The smallest supported Universal size is 76.2 x 127 mm (3 x 5 in.); the largest is 216 x 356 mm (8.5 x 14 in.).
Standard
Standard or
250-sheet tray
optional
250-sheet tray
(Tray 1)
(Tray 2)
X
X
Notes
Vinyl, pharmacy, or dual-sided labels are not supported. Use paper labels
only.
Only two drawers may be installed on the printer at a time.
The maximum amount of paper that can be loaded depends on whether
you have a 250- or 550-sheet tray.
Note: Depending on your model, Tray 2 may be an optional 250- or
550-sheet tray..
Feed paper into the multipurpose feeder only to the point where its
leading edge can contact the paper guides. Do not force the paper into
the feeder.
Media guide
Page 3 of 4
Optional
Multipurpose
550-sheet tray
feeder
(Tray 2)
X
2
(20 lb) paper.
Duplex path
X
ページを印刷する