- ページ 7
トリマー Gardena ComfortCut Plus 500/27のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena ComfortCut Plus 500/27 15 ページ。 Turbotrimmer
Gardena ComfortCut Plus 500/27 にも： 取扱説明書 (16 ページ), 取扱説明書 (16 ページ), 取扱説明書 (9 ページ), 取扱説明書 (16 ページ)
ページを印刷する
Starting the trimmer:
Filament feed
(Tip mechanism):
5. Storage
To put into storage:
Disposal:
(in accordance with
RL 2012/19/EU)
6. Maintenance
DANGER!
Switching the trimmer on:
v Press the start button
For Art. 9811 only: If high performance is required, the speed is
increased automatically.
Switching the trimmer off:
o
v Release the start button
The tip mechanism works when the motor is running.
A clean cut is only achieved with the maximum filament length.
During first operation, it may be necessary to extend the cutting
filament several times.
7
1. Start the trimmer.
2. Hold the trimmer head
parallel to the ground and
briefly touch the trimmer
7
head
onto a solid surface
(avoid constant pressure over
extended periods of time).
The cutting filament
p
audible switching process and adjusted to the correct length
with the filament limiter
one after the other.
Store out of the reach of children.
v S tore your Turbotrimmer in a dry place where it is protected
from frost.
Recommendation:
The trimmer can be suspended by the handle.
The trimmer head is not placed upon any unnecessary strain
if stored in a suspended manner.
The product must not be added to normal household waste.
It must be disposed of in line with local environmental regulations.
v Important : Make sure that the unit is disposed of via your
municipal recycling collection centre.
There is a risk of injury from the cutting filament!
v Always unplug the mains plug of the Turbotrimmer before
carrying out maintenance work!
Risk of injury and risk of damage to property!
v Never clean the trimmer with water or with a water jet
(in particular a highpressure water jet).
o
on the handle.
o
on the handle.
7
p
p
is automatically lengthened with an
a
. If necessary tap several times
a
17