- ページ 6
トリマー Gardena EasyCut Li-18/23 RのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena EasyCut Li-18/23 R 17 ページ。 Accu turbotrimmer
Gardena EasyCut Li-18/23 R にも： 取扱説明書 (16 ページ), 取扱説明書 (18 ページ), 取扱説明書 (11 ページ), 取扱説明書 (17 ページ)
ページを印刷する
ß
ß
ß
ß
ß
B
L1
L2
L3
W
5. Operation
DANGER!
Setting the working position:
Avoid exhaustive discharge:
If the battery is empty, the full discharge protection automatically
switches off the device to prevent the battery from discharging
fully. To prevent the fully charged battery from self-discharging
via the unplugged charger, it should be disconnected from the
charger after charging. If the battery was stored for more than
1 year, it must be fully recharged.
If the battery was fully discharged, the charging indicator lamp
will flash rapidly at the start of charging (twice per second).
If the charging indicator lamp
10 minutes, a fault has occurred (see 8. Troubleshooting).
If the error-LED
on the battery flashes, a fault has occurred
ß
W
(see 8. Troubleshooting). In case of a completely empty battery
it will take approx. 20 minutes until the LEDs on the battery
will indicate charging. But the charging process is indicated by
the flashing LED
on the charger.
9
Battery charging status indicator during operation:
v Press button
on the battery.
ß
B
66 – 99 % charged
L1, L2 and L3 lit.
33 – 65 % charged
L1 and L2 lit.
10 – 32 % charged
L1 lit.
1 – 9 % charged
L1 flashing.
0 % charged
No indicator.
Risk of injury if the Turbotrimmer does not switch off when
you release the start button.
v Never bypass the safety devices or switches (e.g. by tying
the safety lock to the handle).
Risk of injury!
v Remove the battery prior to each adjustment of the
working position, to the shaft length, additional handle
or plant guard!
Working position 1:
Standard trimming
still flashes rapidly after
9
Working position 2:
Trimming beneath obstacles
9
17