- ページ 7

トリマー Gardena ErgoCut 58のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena ErgoCut 58 12 ページ。 Electric hedge trimmer
Gardena ErgoCut 58 にも：取扱説明書 (12 ページ), 取扱説明書 (13 ページ)

ページを印刷する

6. Troubleshooting

Fault

Hedge trimmer does not start

Hedge is not cleanly cut

In the event of other faults please contact GARDENA Service.

Repairs should only be carried out by GARDENA service centres or dealers

authorised by GARDENA.

7. Accessories

GARDENA Maintenance Oil

8. Technical Data

Power consumption, motor

Voltage / Frequency

Strokes

Length of cutter blade

Tooth gap of cutter blade

Weight

Workplace related

sound pressure level L

Uncertainty K

Noise emission value L

Hand / arm vibration a

Measuring process complying with 1) EN 774 2) EU-directive 2000 / 14 / EC. The stated vibration emission value has been measured

according to a standardised test procedure and can be used for comparison of one electric power tool with another. It can also be used

for preliminary evaluation of exposure. The vibration emission value can vary during actual use of the electric power tool.

DANGER ! Electric shock !

V Always unplug the mains plug and slide the

Possible Cause

Extension cable not plugged

in or is damaged.

Cutting unit not locked in 0° or

90° position.

Blade blunt or damaged.

Extends the life of the blade.

ErgoCut 48 (Art. 8875)

550 W

230 V / 50 Hz

2,800 / min.

48 cm

27 mm

3.7 kg

84 dB (A)

pA 1)

3 dB (A)

measured 94 dB (A) /

WA 2)

guaranteed 95 dB (A)

< 2.5 m / s

vhw 1)

protective cover

over the cutter blade

before troubleshooting.

Remedy

v Plug in the extension cable

v Lock cutting unit in 0° or

v Have blade replaced by

ErgoCut 58 (Art. 8876)

550 W

230 V / 50 Hz

2,800 / min.

58 cm

27 mm

3.8 kg

85 dB (A)

measured 95 dB (A) /

guaranteed 96 dB (A)

or if necessary replace it.

90° position.

GARDENA-Service.

Art. 2366

3 dB (A)