- ページ 8

トリマー Gardena String Trimmer 1000 2530のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena String Trimmer 1000 2530 13 ページ。 Grass trimmer

ページを印刷する

Disassembly (ill. A/ D / F)

1. Disconnect the mains plug!

Be careful with the string

limiter blade

. Risk of

injury!

2. Keep the cutting head (a) in

a fixed position and open the

cutting head cover (b) by turn-

ing clockwise as shown in

illustration D.

3. Remove the reel (c).

Remove any remaining string.

Note (ill. E):

If the pressure spring is loose (d)

you can fix it in the reel (c) to

facilitate assembly. For this insert

the pressure spring (d) into the

reel (c) and secure by turning

clockwise.

Assembly (ill. C / E / F / G)

1. Introduce the replacement

7. Trouble-shooting

Problem

String Trimmer ceases

to function.

Cutting strings disappear

into the filament cassette.

Cutting string can no longer

be lengthened.

If you have any problem with your

String Trimmer, please contact

our Customer Service or return

the defective unit together with

a short description of the problem

and, if covered under guarantee,

with a copy of the receipt, directly

to one of the GARDENA Service

Centres listed on the back of

this leaflet.

Disposal :

(in accordance with

RL 2002 / 96 / EC)

string (6 m) into the slit of the

partition of the reel so that

two equal lengths (3 m each)

hang out (ill. E).

2. Wind first the upper string (a),

then the lower string (b) clock-

wise onto the reel.

Note: Wind both strings evenly

and firmly. Fix approx. 10 cm

of each of the string ends in the

slits marked with ∅ ∅ 2 opposite

each other according to ill. F.

3. Thread the string ends out-

wards through the eyelets of

the cutting head (a) (ill. G).

Note: When inserting the

string ends, make sure that the

slits with the fixed strings are

exactly behind the eyelets.

4. Insert the reel and pull both

string ends at the same time

Possible cause

No power supply.

Wrong installation of the

filament cassette.

Cutting string used up.

Cutting string jammed.

Cassette not properly mounted.

We expressly point out that,

in accordance with the product

liability law, we are not liable

for any damage caused by our

units if it is due to improper

repair or if parts exchanged are

not original GARDENA parts

or parts approved by us, and,

if the repairs were not carried

out by a GARDENA Service

The product must not be added to normal household waste. It must be

disposed of properly.

until they have noticeably

come out of the slits.

5. (ill. G) Press the reel (c) down

onto the spring (d) and secure

the cutting head cover (b) by

turning anticlockwise until it

stops.

6. (ill. C) To check for proper func-

tion depress the cutting head

cover

and pull both string

ends at the same time. If the

unit operates properly both

strings will lengthen. If the

cutting strings are too long,

they will be automatically ad-

justed to the correct length

by the string limiter blade

when the String Trimmer is

being operated.

Ensure correct working

position before switching on

the String Trimmer.

Remedy

Check power supply (e. g. by

means of a voltage tester or by

testing on another socket).

Remove filament cassette and

reinsert (see point 6).

Replace string (see point 6).

Remove filament cassette,

unwind and rewind string (see

point 6.1).

Disassembly / assembly of the

filament cassette (see point 6.1).

Centre or an authorised spe-

cialist. The same applies to

spare parts and accessories.