- ページ 6
トリマー Gardena THS 500/48 8883のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena THS 500/48 8883 15 ページ。 Telescopic hedge trimmer
ページを印刷する
2. ASSEMBLY
1
To assemble the telescopic
handle:
ß
M
3
3. OPERATION
1
To connect the hedge
trimmer:
8
6
6
The hedger, blade, protective cover and the operation instructions
are included in the scope of delivery.
DANGER! Risk of physical injury!
Cut injury when the unit starts accidentally.
2
v Before you assemble the unit, make sure that the mains
cable is disconnected and the protective cover
over the blade
4
1. Slide the telescopic pipe
the stop position. Ensure that the two markings
other.
5
2. Tighten the grey nut
DANGER! Risk of physical injury!
Cut injury when the unit starts accidentally.
2
v Before you connect, adjust or transport the unit,
disconnect the mains cable and slide the protective
cover
1
DANGER! Risk of electric shock!
To avoid damage to the mains cable
cable
v Before you operate the unit insert the extension cable
into the cable lock
v Never take hold of the protective cover
ing the unit.
7
1. Loop the extension cable
and pull tight.
t
2. Connect the plug
r
cable.
3. Connect the extension cable
.
2
ß
M
into the motor unit
3
.
5
over the blade
.
2
must be inserted into the cable lock
7
.
8
, insert the loop into the cable lock
7
of the unit into the socket
r
into a 230 V mains socket.
7
is slid
1
3 5
until you reach
4
face each
ß
M
the extension
6
.
8
7
when connect-
1
8
of the extension
t