- ページ 11

電話 Avaya 3616 SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Avaya 3616 Series 19 ページ。 Wireless telephones
Avaya 3616 Series にも：クイック・リファレンス・マニュアル (1 ページ), クイック・リファレンス・マニュアル (2 ページ), クイック・リファレンス・マニュアル (2 ページ)

Installation Guide

The following table shows maximum users per AP based on the AP's ability to handle simultaneous calls:

User Calling Intensity

Erlangs per User

Max Active Calls per AP

Users Supported per Access Point

Areas where heavier wireless telephone usage is expected, such as cafeterias and auditoriums, can

obtain higher call capacity and handle more users by installing additional APs. For most enterprise

applications however, the table above should be sufficient in demonstrating the number of wireless

handsets supported within each AP's coverage area.

3.0 Network Infrastructure Considerations

Avaya wireless telephone infrastructure components must connect to a facility's LAN using Ethernet

switches rather than Ethernet hubs in order to provide adequate bandwidth and limit traffic collisions and

bottlenecks.

Ethernet switches should be configured to negotiate the connection requirements automatically. AVPPs

can be set to automatically negotiate the Ethernet connection however 100Base-T, full-duplex

transmission is required to support the maximum simultaneous voice calls and optimal system

performance.

Network wiring is an important component of any Ethernet-based system and is subject to local and

state building code specifications. Cat 5 or better, 4-pair 10/100 Base-T Ethernet cabling should be used

for Avaya wireless telephone infrastructure equipment.

Avaya wireless telephones operate as LAN client devices and therefore require IP addresses to operate

in the network. IP addresses can be assigned statically through the configuration menus on the handsets

Octiober 2008

Light

Moderate

Heavy

0.10

0.15

Users Supported per AP

(1% Blocking Probability)

0.20