- ページ 5

芝生とガーデン用品 Gardena 1198のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena 1198 11 ページ。 Automatic water distributor
Gardena 1198 にも：取扱説明書 (9 ページ)

ページを印刷する

5.1. Connection to the Water Computer 1060

The water inlet (3) can be fitted

with the enclosed "Profi" Maxi-

Flow System Tap Connector (5) or

the Original GARDENA System

Tap Con nector (7).

When operating a GARDENA

Sprinkler System the "Profi"

Maxi-Flow System Tap Con nector

(5) should be used. The con nec-

tion to the Water Computer/ Water -

timer is, in this instance, carried

5.2. Connection of watering accessories, watering system

The connection of the GARDENA

Sprinkler System is carried out

with a 19 mm (3 / 4 " ) hose and the

"Profi" Maxi-Flow System Con-

nector Set (Art. no. 1505).

If using the Sprinkler System

Connector Art. 2761, the thread

must be sealed with white teflon

tape available from a from a good

6. Operation

Adjust the dial disc (2) to position 1.

To accomplish this remove the

protection cap (1) by turning the

unit to the left. Pull the dial disc (2)

slightly upwards and turn it to the

right until the arrow points to water

outlet 1. Then fix the pro tection

cap (1) again.

Now program your GARDENA

Water Computer 1060. Be sure

to differentiate using the following

text with regard to Automatic

Water Distributor support between

models with or without "Special

Program". When program ming

Example:

Programme /

Start Time

water outlet

19:00

19:40

20:20

21:00

}

Sealed un-

21:15

used outlets

21:46

out with a 19 mm (3 / 4 " ) hose and

the "Profi" Maxi-Flow System

Con nector Set (Art. no. 1505).

If used in connection with other

watering systems or -acces -

sories (Micro-Drip-System or

sprinklers), please use one of

the en closed Original GARDENA

System Tap Connectors (7).

The connection to the Water

Computer/ Watertimer is, in this

DIY store (or GARDENA Teflon

Tape Art. 7219).

If you connect other watering

systems or -accessories

(sprinklers, Micro-Drip-System),

please use the enclosed Original

GARDENA System Tap Connec-

tors (7).

Please close off unused water

the water computer without the

"Special Program", it is important

that all 6 pro grammes are pro-

grammed and the numbers of the

programmes (1– 6 ) of the respec-

tive water outlets on the Automatic

Water Distributor (1– 6 ) are cor -

rectly ordered. Ensure that with

all 6 programmes the same

watering days are entered.

If you do not use all 6 water out -

lets, the unused outlets must still

be programmed into the com puter

to ensure the Automatic Water

Distributor returns to its original

setting at all times. We recom-

Run Time

0:30

0:05

0:01

instance, carried out with a

13 mm (1/ 2 " ) hose and Original

GARDENA Hose Connection

System Parts.

To prevent any malfunction of the

unit, please insert the enclosed

dirt filter (4) into the water inlet and

remove the washer of the threaded

Tap Connector before connecting

the tap connector..

outlets with the enclosed end

caps (8).

If you require accessories in

ex cess of the enclosed, please

visit your GARDENA stockist.

mend a watering run time of

1 minute for all unused outlets.

Please also note the following

hints:

To ensure correct function

of the switch mechanism,

please leave between the end

of one programme and the be -

ginning of the next a gap of

10 minutes. The time gap bet-

ween each programme step

increases to 30 minutes if you

switch from a sealed unused

outlet to the next outlet.

2nd

3rd