- ページ 2

溶接システム Fronius 63A-1のPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。Fronius 63A-1 17 ページ。 Smart meter
Fronius 63A-1 にも：クイックマニュアル (20 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (8 ページ), クイック・スタート・マニュアル (10 ページ)

1. GENERAL

Fronius Smart Meters are energy meters which can be used to measure

consumption data of a site, or for export limitation of a PV system with the

Fronius SnapINverter range.

The Fronius Smart Meter measures the power flow to the loads, or grid,

and feeds the information via ModBus RTU/ RS485 communication to the

Fronius Datamanager 2.0 (comes built-in with Fronius Galvo, Primo, Symo

and Eco SnapINverters, excluding Light versions. It can also be retrofitted

to all other Fronius inverters).

This document describes how to install and set up only the 63A-1 single phase or 63A-3 3-phase

Fronius Smart Meters. Please use the below links if using a different model of Fronius Smart Meter.

Further information about the entire range of Fronius Smart Meters can be found in our Fronius Smart Meter

Application Guide:

https://www.fronius.com/~/downloads/Solar%20Energy/Whitepaper/SE_WP_Fronius_Smart_Meter_Application

_Guide_EN_AU.pdf

For installation and setup instructions of the 240V1-UL or 480V3-UL Fronius Smart Meters refer to the following

document:

https://www.fronius.com/~/downloads/Solar%20Energy/Operating%20Instructions/42%2C0410%2C2289.pdf

For installation and setup instructions of the 50kA-3 Fronius Smart Meter refer to the following document:

https://www.fronius.com/~/downloads/Solar%20Energy/Technical%20Articles/SE_TEA_Quick_Guide_How_to_i

nstall_and_commission_a_Fronius_Smart_Meter_50kA-3_EN_AU.pdf

The document for setting export limitation with the Fronius Smart Meter can be found here:

https://www.fronius.com/~/downloads/Solar%20Energy/Technical%20Articles/SE_TEA_Quick_Guide_How_to_

set_up_Export_Limiting_using_the_Fronius_Smart_Meter_EN_AU.pdf

2/17

02/2017