- ページ 6

電子レンジ KitchenAid KBMS1454SSS2のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。KitchenAid KBMS1454SSS2 8 ページ。 Built-in microwave oven

INSTALLATION

INSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install

microwave oven.

Failure to do so can result in back or other injury.

NOTE: For this microwave oven, the door handle may be used for

lifting. Do not use any other portion of the control panel, side

brackets, front frame or trim for lifting.

1. Empty microwave oven of any loose items.

2. Using 2 or more people, slide the microwave oven all the way

into the opening.

3. Center the microwave oven within the opening. Open the

microwave oven door.

Electrical

Shock Hazard

Plug into a grounded

3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension

cord,

Failure to follow

these instructions can result in death,

fire, or electrical

shock.

............

7. With the microwave oven near the opening, plug the

microwave oven into the grounded 3-prong outlet.

8. Replace microwave oven in cutout opening.

g. Open the microwave oven door. The holes in the door facing

frame should align with the holes just drilled into the cabinet.

Fasten the microwave oven door facing to the cabinet using

four 1" T-10 screws.

10. Proceed to "Complete Installation" section.

A, Microwave oven door facing frame

B. Cabinet

C. 1" T-lO screws (4)

4. Mark 4 holes (2 on each side) in the door facing frame of the

microwave oven,

5. To avoid damage to the frame while drilling during the next

step, close the door and remove the microwave oven,

6. Drill the 4 holes using 5/64" (2 mm) drill,