- ページ 11

プリンター Lexmark MS510 SeriesのPDF クイック・リファレンスをオンラインで閲覧またはダウンロードできます。Lexmark MS510 Series 18 ページ。 Machine type 4514-630, 4514-635, 4514-636
Lexmark MS510 Series にも: テックノート (3 ページ), 引越しマニュアル (2 ページ), マニュアル (20 ページ), 接続マニュアル (6 ページ), 印刷マニュアル (5 ページ), ペーパーマニュアル (4 ページ), 情報マニュアル (1 ページ), セットアップシート (2 ページ), スペック (2 ページ), サービスマニュアル (18 ページ), クイック・リファレンス (17 ページ)

Lexmark MS510 Series クイック・リファレンス
2
Squeeze the tab on the left width guide, and then move the guides
for the paper you are loading.
1
2
3
Prepare the paper or specialty media for loading.
Flex sheets of paper back and forth to loosen them, and then
fan them. Do not fold or crease the paper. Straighten the edges
on a level surface.
Hold transparencies by the edges. Flex the stack of
transparencies back and forth to loosen them, and then fan
them. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the
transparencies. Be careful not to scratch them.
Flex the stack of envelopes back and forth to loosen them, and
then fan them. Straighten the edges on a level surface.
4
Load the paper or specialty media.
Notes:
Do not force paper or specialty media into the multipurpose
feeder.
Make sure the paper or specialty media is below the
maximum paper fill indicator located on the paper guides.
Overfilling may cause paper jams.
Load paper, transparencies, and card stock with the
recommended printable side faceup and the top edge entering
11
the printer first. For more information on loading
transparencies, see the packaging that the transparencies came
in.
Note: When loading A6‑size paper, make sure the
multipurpose feeder extender rests lightly against the edge
of the paper so that the last few sheets of paper remain in
place.