- ページ 8
芝生とガーデン用品 Gardena Flex 1890のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena Flex 1890 17 ページ。 Water control
Gardena Flex 1890 にも： 取扱説明書 (18 ページ)
ページを印刷する
Problem
Manual watering is
not possible using the
button
Watering program is
not being undertaken
(no watering)
Water Control does
not close
8
1890-28.960.01.indb 8
Possible Cause
Low battery is continuously displayed.
Tap is turned off.
Controller is not connected.
Minimum pressure of 0.5 bar not
available.
Program entry / modification during or
just before the start pulse.
Valve was opened manually previously.
Tap is turned off.
Soil moisture or rain sensor registers
damp.
Controller is not connected.
Low battery is continuously displayed.
Minimum pressure of 0.5 bar not
available.
Minimum quantity of water drawn is
less than 20 l/h.
Valve soiled.
Remedy
v Insert a new (alkaline) battery.
v Turn the tap on.
v Mount the controller on housing.
v Ensure a pressure of at least
0.5 bar.
v Make program entry / modifica-
tion outside the programmed
start times.
v Avoid possible program over-
laps.
v Turn the tap on.
v If dry, check the setting / location
of the soil moisture / rain sensor.
v Mount the controller on housing.
v Insert a new (alkaline) battery.
v Ensure a pressure of at least
0.5 bar.
v Connect more drip heads.
v Flush in the opposite direction to
the normal flow direction.
19.11.18 08:47