- ページ 2
電話 Avaya 9640 SeriesのPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Avaya 9640 Series 2 ページ。 Ip office telephone
Avaya 9640 Series にも： エンドユーザマニュアル (18 ページ), ユーザーマニュアル (6 ページ), クイックマニュアル (5 ページ)
ページを印刷する
• To switch to handsfree, press the
SPEAKER key. If you were using the handset you can now safely
replace it.
• To switch to headset mode, press the
replace it.
• If you have answered the call on the speaker or headset, pressing the SPEAKER or HEADSET key again
before you select another mode will end the call.
• Just pressing the
key or any other appearance button will put the current call on hold.
Answering Another Call
If you are already on a call, answering a new call will automatically put the existing call on hold.
Drop.
1. Using the
up and down
arrow keys, scroll the display highlight the waiting call.
• To quiet the ringing, press the Ignore soft key. The call will still continue alerting and can be answered or
ignored.
• To redirect the call to voicemail, press the To VM soft key.
2. To answer the call press the
button. Your existing call will be put on hold.
1.2.1 Divert a Call to Voicemail
You can transfer a call targeted at you directly to your voicemail mailbox.
1. If the call is not the currently highlighted call on the display, use the
2. Press the To VM soft key. The call is redirected to your mailbox.
1.2.2 Ignore an Incoming Call
You can quiet the ringer of a currently alerting call. The call will continue alerting visually but with no audible ring.
1. If the call is not the currently highlighted call on the display, use the
2. Press the Ignore soft key.
3. The call will continue alerting but with no audible ring.
1.3 Making Calls
If you are not already on a call, then you can just dial the number. The first available appearance button will be used for
the call. Alternatively, you can press a specific appearance button in order to make a call using that button.
If the number you dial matches a user or group on the telephone system, the directory name of the user or group is
shown and the call starts altering the target.
If the call is to a user, and they do not answer, you can set and callback by pressing CallBack and then ending the call by
pressing Drop. When a callback is set, the when the user next uses their phone or ends their current call, the system will
call you and when you answer, automatically make another call to the user.
1.3.1 Calling a Person from the Contacts List
You can use any directory contacts to make a call. You can also use the directory in almost any telephone function where
you need to select the number for a destination, for example during transfers.
1. Access the contacts directory:
a. Press the
CONTACTS key. The directory menu is displayed.
b. Use the
left and right
arrow keys to select which type of directory entries you want displayed.
• All
All directory entries.
• External
Directory entries stored by the telephony system for all users to use.
• Groups
The names and numbers of hunt groups on the telephone system.
• Users
The names and numbers of other users on the telephone system.
• Personal
Your own personal directory entries.
c. Use the the
up and down
arrow keys to scroll through the list or start dialing the name you want to find to
display only matching entries. If you dial a name to return to the full list press the Clear soft key.
d. To view more details of the highlighted name press Details. To return to the directory press List.
2. When the required entry is highlighted press Call or press the
3. Continue as for a normally dialed call.
9640 Quick Reference Guide
IP Office
HEADSET key. If you were using the handset you can now safely
[1]
unless your first press
up and down
arrow keys to
up and down
arrow keys to
button next to the name.
01a (02/03/2010)
1.3.2 Calling a Person from the Call Log
You can use the call log to make calls to the number included in the currently selected call record.
1. Access the call log.
a. Press the
b. The display will change to show your call log records. The caller's name is shown if known, otherwise the
number.
c. Use the
Missed, Incoming and Outgoing.
• If you have any new missed call records (ie. the CALL LOG button lamp is illuminated) the call log will
open showing your missed calls.
d. Use the
2. Press Call to call the number displayed in the call record.
1.3.3 Redialling a Previous Number
When Redial is displayed it can be used in one of two ways, set by the phone's redial mode setting.
List Mode
This redial method is used when your phone's redial mode is set to List.
1. Access the redial list.
highlight it.
a. Press Redial. The list of outgoing calls is displayed.
b. Use the
2. Press Call to call the number displayed in the call record.
3. Continue in the same way as for a normal dialed call.
One Number Mode
highlight it.
This redial method is used when your phone's redial mode is set to One.
1. Press Redial.
2. The number for the most recent outgoing call in your personal call log is redialed.
3. Continue in the same way as for a normal dialed call.
1.3.4 Withholding Your Number
You can select to withhold your number on external calls. Note that this option may not be supported in all situations. It
may depend on the configuration of your phone system and options supported by your telephone line provider.
1. Press the Features soft key if shown.
• To access the menu during a call, press the
2. Use the
up and down
3. Use the
up and down
4. Press Change to switch the option On or Off.
5. Press Save.
1.3.5 Adjust the Call Volume
While talking, you can adjust the volume of the incoming call. The volume is separately adjusted for which every device
you are currently using (handset, headset or speaker).
1. With the call connected, press the
2. Use the + plus and – minus keys to adjust the volume.
3. The display will return to normal after a few seconds.
1.3.6 Muting a Call
Muting a call stops the caller from hearing you. However you can still hear them.
• The mute setting remains active even if you switch between calls using hold and or appearance buttons.
• If you change how you are listening to the call, for example switching from the handset to the speaker, the mute
setting is canceled.
1. To activate mute, press the
2. To switch mute off, press the key again.
1.3.7 Ending Calls
• The Drop option can be used to end the currently highlighted call on the display.
• If the call is connected on the phone's speaker, the
call.
- 2
9640 Quick Reference Guide
IP Office
CALL LOG button.
left and right
arrow keys to select which call log records you are viewing. The options are All,
up and down
arrow keys to scroll through the records.
up and down
arrow keys to scroll through the 10 most recent outgoing calls.
right arrow key and then press the Features soft key.
arrow keys to highlight Call Settings. Press Select.
menu keys to highlight Withhold Number.
VOLUME key.
MUTE key. The button will be lit while mute is active.
SPEAKER key is lit. Pressing the key again will end the
- 3
01a (02/03/2010)