- ページ 7

芝生とガーデン用品 Gardena MultiControl duoのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena MultiControl duo 17 ページ。 Water computer
Gardena MultiControl duo にも：取扱説明書 (17 ページ)

ページを印刷する

5. Programming

Set current time

and day of week :

[Level 2]

Watering modes :

To set the programme, the controller can be removed and

mobile programming can be carried out (see 4. Initial Operation

"Inserting battery" ).

Programming can be discontinued at any time by pressing the

Man. button. All programme data changed up to this time and

confirmed with the OK button is saved.

1. Press Menu-key [Level 2] (not necessary if the battery

has just been inserted).

The hours display and Time flash.

2. Set the time in hours with the ▼-▲ button

(example:

hours) and confirm with the OK-key.

Time and the minutes display flash.

3. Set the time in minutes with the ▼-▲ button

(example:

minutes) and confirm with the OK-key.

Time and the day of the week display flash.

4. Set day of week with the ▼-▲ buttons (e.g. (Tu) and confirm

with the OK button.

The display moves to the message "Entering watering

programme" of the watering mode "Scheduled watering"

[Level 3] .

Start Prog and the hours will flash on the display.

The Water Computer has 3 watering modes :

A) Scheduled watering :

With the "scheduled watering", watering begins as per the set

programme. There is the additional option to consider soil

moisture or rain in the watering programme. In the case of rain

or sufficiently moist soil, the programme's stop is activated or

activation of the programme is prevented. Manual watering

Man. + OK is still possible.

B) Direct sensor control :

With "direct sensor control", watering is exclusively controlled in

dependency on soil moisture between 20:00 and 06:00, if the

sensor has indicated dry. 1 or 2 Soil Moisture Sensors can be

connected.

C) Manual watering :

With "Manual watering", watering begins immediately after

Man. + OK has been pressed and can be operated indepen-

dently of the sensor status.