- ページ 6
芝生とガーデン用品 Gardena SR 1600 7946のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena SR 1600 7946 11 ページ。 Pond silt remover
ページを印刷するOperation as a
Dry Suction Unit :
6. Storage
Storage :
Disposal :
(in accordance with
RL 2002 / 96 / EC)
7. Maintenance
Pond Silt Remover
cleaning :
7
C
3
B
4
14
The filter bag
a dry suction unit.
1. Pull mains plug of the Dry Suction Unit out of the socket.
D
2. Remove motor housing (see 4. Assembly).
3. Put the enclosed filter bag
8
suction hose
4. Refit motor housing (see 4. Assembly).
5. Fit the nozzle required (see 3. Function) on the suction pipe.
6. Plug the mains plug of the dry suction unit into an electric
socket.
7. Set the ON switch
8. After use, turn the ON switch
A new Filter Bag Art. 7946-00.900.50 can be ordered from
GARDENA Service.
Store out of the reach of children.
v Clean the Pond Silt Remover (see 7. Maintenance) and store
in a frost-free place.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
DANGER ! Electric shock !
V Before any maintenance work, unplug the equipment
from the mains.
1. Remove the suction hose
B
plug
2. Undo the filter tray locks
3. Remove filter cover
8
4. Remove the foam filter
E
5. Wash out the filter tray
Replace the foam filter
6. Wash out all hoses and nozzles with clean water.
7. Reassemble the Pond Silt Remover (see 4. Assembly).
6
The foam filter can be ordered from GARDENA Service.
D
must be used when the system is operated as
D
on over the end piece of the
8
.
A
to position (I) ON.
A
8
, discharge hose
3
from the filter tray
.
6
and remove the motor housing
E
(bayonet fitting).
C
from motor housing
3
and foam filter
C
if necessary.
to the (0) OFF position.
4
or stopper
7
.
C
with clean water.
7
.