- ページ 10
電話 Avaya BCM50のPDF テクニカル・コンフィギュレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Avaya BCM50 18 ページ。 Business communication manager for skype sip connect service
Avaya BCM50 にも: 設定マニュアル (14 ページ)
2.2 ERS 5000 – Edge Switch
2.2.1 Avaya Automatic QoS CLI Configuration
Avaya Automatic QoS is configured by using the following command:
5520-6#(config)# qos agent nt-mode ?
disable
NT application traffic processing disabled on all ports
mixed
NT application traffic processing enabled on all ports with egress
DSCP remapping
pure
NT application traffic processing enabled on all ports without
egress DSCP remapping
2.2.2 Core Ports
The core or uplink port members should be configured as QoS trusted ports. This can be accomplished
by first adding a new QoS interface group and then adding the port members to this interface group.
5520-6#(config)# qos if-group name <if-group_name> class trusted
5520-6#(config)# qos if-assign port <port members> name <if-group_name>
5520-6#(config)# qos if-assign port <port members> name <if-group_name>
2.2.3 Queue Set
By default, the ERS 5000 is configured with Queue set 2 and Large buffers. This can be verified by using
the following command:
5520-6# show qos agent
QoS NVRam Commit Delay: 10 seconds
QoS Queue Set: 2
QoS Buffering: Large
QoS UBP Support Level: Disabled
To view the various settings for each queue set, enter the following command:
5520-6(config)# show qos queue-set
After choosing the queue set you wish to use, enter the following command:
5520-6(config)# qos agent queue-set <1-8>
Please refer to the document titled "Filters and QOS Configuration for Ethernet Routing
Switch 5000 Technical Configuration Guide" document number NN48500-559 for more
details.
As shown below, the default queue set of 2 should not be used for Avaya Automatic QoS. It is
recommended to use at least queue set 8 which has one strict queue and seven weighted round robin
queues and use regular buffers.
Ethernet Routing Switch 4500, 5000, Avaya BCM 50, 450, Avaya CS 1000, Avaya CS 2100, Avaya SRG 50
avaya.com
9