- ページ 9

電話 Avaya Definity 6408のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avaya Definity 6408 17 ページ。 6400 series, multi-line voice terminal
Avaya Definity 6408 にも：クイック・リファレンス・カード (6 ページ), ユーザーマニュアル (14 ページ), ユーザーマニュアル (2 ページ)

5. Dial the list item (1, 2, 3...9).

6. Dial the number you want to store up to 24 digits.

7. Press # - The number is stored.

8. If you want to store additional items on the same list, repeat Steps 5 through 7. lf you want to store on

another list, hang up and return to Step 1.

9. Hang up to end programming.

To place a call using a personal AD list:

1. Dial the Abbreviated Dialing List code: #7.

2. Dial the desired list number (2, 3).

3. Dial the desired list item (1, 2, 3... 9).

The call is automatically dialed.

To place a call using the system AD list:

1. Dial the Abbreviated Dialing List code: #71.

2. Dial the desired list item (01, 02, 03... 99).

The call is automatically dialed.

To automatically place another call to a busy or unanswered extension:

1. Press the Menu button and then the softkey below AutCB (if available on your display) during the call

attempt

or, Press AutoCallBk (if administered) during the call attempt.

Note: If you send your calls to coverage after activating Automatic Callback, your callback calls will

still ring at your extension and will not be redirected to coverage.

2. Hang-up.

You hear a priority ring when both you and the called extension are idle. When you answer, regular ringing is

sent to the called party.

1. Lift the handset when you hear a priority ring

Note: Automatic Callback is automatically canceled after 30 minutes.

To cancel Automatic Callback:

1. Press the Menu button and then the softkey below AutCb again (if available one your display) while on-

hook.

Page 8

Automatic Callback