- ページ 15

電話 Avaya Definity 6416のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avaya Definity 6416 17 ページ。 6400 series, multi-line voice terminal
Avaya Definity 6416 にも：クイック・リファレンス・カード (6 ページ), ユーザーマニュアル (14 ページ), ユーザーマニュアル (2 ページ)

To select a personalized ringing pattern:

1. Press Conf while on-hook.

The current ringing pattern plays and repeats every three seconds,

2. Continue to press (and then release) Conf to cycle through all eight ringing patterns.

If you want to save the ringing pattern currently being played, do not press Conf anymore.

You hear the selected ringing pattern two more times, then it is automatically saved.

Your new ringing pattern is set.

Note: If you go off-hook, receive a call, or lose power during selection, the process is interrupted and

you must start again.

To send all calls (except priority calls) to coverage:

1. Press the Menu button and then the softkey below SAC (if available on your display) while on-hook.

or, Press Send All Calls while on-hook.

or, Dial the Send All Calls code *33 while on-hook.

Note: You may hear a ring-ping tone from your telephone as each call is forwarded

To cancel Send All Calls:

1. Press the Menu button and then the softkey below SAC again (if available on your display) while on-hook.

or, Press Send All Calls again while on-hook.

or, Dial the Send All Calls Cancel code #33 while off-hook.

To place or answer a call using the speakerphone:

Note: It is not necessary to activate the speaker to dial an extension or outside call (9+number). The

speakerphone is automatically activated when you begin to dial.

1. Press Spkr The red light next to Spkr goes on.

2. Place or answer a call, or access the selected feature.

3. Adjust the speakerphone volume if necessary.

To raise the volume, press the right half of the Volume control button labeled

To lower the volume, press the left half of the Volume control button labeled v.

Page 14

Select Ring

Send All Calls (SAC)

Speakerphone