- ページ 6

ドリル Makita 2-SPEED HAMMER 8401のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 2-SPEED HAMMER 8401 12 ページ。 13 mm (112”) 2-speed hammer drill variable speed i reversing

ページを印刷する

Switch action

Tool speed i s increased by increasing pres-

sure on the trigger.

To start the tool,

simply pull the trigger. Release the trigger

to stop. For continuous operation, pull the

trigger and then push in the lock button.

To stop the tool while in the locked posi-

tion, pull the trigger fully, then release it.

A speed control screw is provided so that

tool speed can be maintained a t a constant

speed other than i t s maximum speed. Turn

the speed control screw clockwise for

higher speed, and counterclockwise for

lower speed.

Trigger

switch L

button

CAUTION :

Before plugging in the tool, always check t o see that the trigger switch actuates properly

and returns t o the "OFF" position when released.

Reversing switch action

This tool has a reversing switch to change

the direction

rotation. Move the revers-

ing switch lever t o the

"FWD"

position for

clockwise rotation or the "REV" position

for counterclockwise rotation.

Reversing switch lever

CAUTION :

Always check the direction of rotation before operation.

*Use the reversing switch only after the tool comes t o a complete stop. Changing the

direction of rotation before the tool stops may damage the tool.

Speed change

A gear shift mechanism allows tool opera-

tion within two versatile speed ranges. For

higher speeds, turn the speed change lever

so that i t s

mark is aligned with the

"11"

mark on the tool body. For lower speeds,

turn the speed change lever so that i t s

mark is aligned with the

"I"

mark on the

tool body.

Speed change lever