- ページ 7

ドリル Makita 6070DのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 6070D 16 ページ。 Variable speed, reversible cordless driver drill

Installing or removing driver bit

CAUTION :

When installing or removing the bit, be careful not to touch the trigger switch.

install the bit, place it in the chuck as far as

it will go. Tighten the chuck by hand. Place

the chuck key in each of the three holes and

tighten clockwise.

Be sure to tighten all three chuck holes

evenly.

To remove the bit, turn the chuck key coun-

terclockwise in just one hole, then loosen the

chuck by hand.

Chuck key

Switch action

Tool speed is increased by increasing pres-

sure on the trigger. To start the tool, simply

pull the trigger. Release the trigger to stop.