- ページ 2

プリンター Lexmark MS811 SeriesのPDF 引越しマニュアルをオンラインで閲覧またはダウンロードできます。Lexmark MS811 Series 3 ページ。 Ms811/ms812 series monochrome laser printer
Lexmark MS811 Series にも： テックノート (3 ページ), 接続マニュアル (6 ページ), マニュアル (20 ページ), 印刷マニュアル (16 ページ), ペーパーマニュアル (4 ページ), メニューマップ (3 ページ), 用品マニュアル (3 ページ), セットアップシート (2 ページ), データシート (2 ページ)

ページを印刷する
Lexmark MS811 Series 引越しマニュアル
•
Use the handholds located on both sides of the printer to lift it.
•
Make sure your fingers are not under the printer when you set it down.
•
Make sure there is adequate clearance around the printer.
•
Use only the power cord provided with this product or the manufacturer's authorized replacement.
Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty.

Selecting a location for the printer

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained
personnel to lift it safely.
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options,
then leave enough room for them also. It is important to:
•
Set up the printer near a properly grounded and easily accessible electrical outlet.
•
Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156
standard.
•
Provide a flat, sturdy, and stable surface.
•
Keep the printer:
–
Clean, dry, and free of dust.
–
Away from stray staples and paper clips.
–
Away from the direct airflow of air conditioners, heaters, or ventilators.
–
Free from direct sunlight and humidity extremes.
•
Observe the recommended temperatures and avoid fluctuations:
Ambient temperature 15.6°C – 32.2°C
Storage temperature
10°C – 43.3°C
•
Allow the following recommended amount of space around the printer for proper ventilation:
Moving Guide
Page 2 of 3