- ページ 5

ドリル Makita 6096DのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Makita 6096D 5 ページ。 Cordless high speed drill equipped with electric brake
Makita 6096D にも：取扱説明書 (9 ページ), 取扱説明書 (17 ページ), 取扱説明書 (13 ページ)

ページを印刷する

4.Assembling on the housing

1) To assemble the one body of gear assembly and motor etc. on the housing L, place the speed change lever

on the position shown on the figure 5.

Inside of Housing "L"

5.Assembling of the chuck

1) Place the chuck on the spindle face.

2) Mount the hexagon rod spanner on the chuck and use the vice to fix them.

3) Set to the drill mode, normal turning and low speed.

4) Set the full charged battery and securely hold the handle.*1

5) Allow the trigger to full speed in about 1 second while no impact is adding.

*Insufficiently holding the handle may cause the handle to turn around in locking. This machine is going

to turn clockwise.

6) Widen the claw of chuck at maximum and then fasten the screw for holding the chuck.

*The left-handed screw is used.

ircuit drawing

Fig. 5

Red mark

Black

Red

DC motor

- terminal

+ terminal

Lever should be left light position,

not nuetral position

Switch