- ページ 5

ドリル Makita 6176DのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 6176D 17 ページ。 Makita cordless driver drill instructions manual 6176d
Makita 6176D にも: 取扱説明書 (17 ページ), パーツリスト (1 ページ)

Makita 6176D 取扱説明書
IMPORTANT SAFETY INSTRUCTIONS FOR
CHARGER & BATTERY CARTRIDGE
1. SAVE THESE INSTRUCTIONS- This man-
ual contains important safety and operat-
ing instructions for battery charger.
2. Before using battery charger, read all
instructions and cautionary markings on
(1) battery charger, (2) battery, and (3)
product using battery.
3. CAUTION - To reduce risk of injury, charge
only
MAKITA
Other types of batteries may burst caus-
ing personal injury and damage.
4. Do not expose charger to rain or snow.
5. Use of an attachment not recommended
or sold by the battery charger manufac-
turer may result in a risk of fire, electric
shock, or injury to persons.
6. To reduce risk of damage to electric plug
and cord, pull by plug rather than cord
when disconnecting charger.
7. Make sure cord is located so that it will
not be stepped on, tripped over, or other-
wise subjected to damage or stress.
8. Do not operate charger with damaged
cord or plug - replace them immediately.
9. Do not operate charger if it has received a
sharp blow, been dropped, or otherwise
ADDITIONAL SAFETY RULES FOR CHARGER &
TOOL
1. The charger and the tool are specifically
designed to work together. Do not attempt
to charge any other cordless tool with this
rechargeable
batteries.
damaged in any way; take it to a qualified
serviceman.
10. Do not disassemble charger or battery
cartridge; take it to a qualified serviceman
when service or repair is required. Incor-
rect reassembly may result in a risk of
electric shock or fire.
11. To reduce risk of electric shock, unplug
charger from outlet before attempting any
maintenance or cleaning. Turning off con-
trols will not reduce this risk.
12. The battery charger is not intended for
use by young children or infirm persons
without supervision.
13. Young children should be supervised to
ensure that they do not play with the bat-
tery charger.
14. If operating time has become excessively
shorter, stop operating immediately. It
may result in a risk of overheating, possi-
ble burns and even an explosion.
15. If electrolyte gets into your eyes, rinse
them out with clear water and seek medi-
cal attention right away. It may result in
loss of your eyesight.
charger. Do not attempt to charge the tool
with any other charger.
USC003-1
5