- ページ 8

ドリル Makita 6201DのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 6201D 15 ページ。 Cordless driver drill equipped with electric brake

Switch action

Tool speed is increased by increasing pres-

sure on the trigger. To start the tool, simply

pull the trigger. Release the trigger to stop.

CAUTION :

Before inserting the -attery cartridge into the tool, always check to see that the trigger

switch actuates properly and returns to the "OFF" position when released.

Reversing switch action

This tool has a reversing switch to change

the direction of rotation. Slide the revers-

ing switch to the left for clockwise rota-

tion or t o the right for counterclockwise.

CAUTION :

.Always check the direction of rotation before operation.

Move the reversing switch only after the tool comes to a complete stop. Changing the

direction of rotation before the tool stops may damage the tool.

Speed change

To change the speed, slide the speed change

lever to the "H" side for high speed or

"L" side for low speed. To slide the speed

change lever easily, pull the trigger slightly

while pushing the speed change lever. Be

sure that the speed change lever is set to

the correct position before operation. Use

the right speed for your job.

\,Speed

change lever

CAUTION :

Always set the speed change lever fully into the correct position. I f you operate the tool

with the speed change lever positioned halfway between the "H" side and "L" side, the

tool may be damaged.