- ページ 4

電動工具 Gardena 9852-33のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena 9852-33 14 ページ。 Grass shear/shrub shear
Gardena 9852-33 にも：取扱説明書 (16 ページ), 取扱説明書 (11 ページ), 取扱説明書 (15 ページ), 取扱説明書 (15 ページ), 取扱説明書 (16 ページ)

ページを印刷する

g) Always disconnect the machine from the power supply

(i. e. remove the plug from the mains remove the disa-

bling device or removable battery)

– whenever the machine is left unattended,

– before clearing a blockage,

– before checking, cleaning or working on the

machine,

– after striking a foreign object,

– whenever the machine starts vibrating abnormally.

h) Take care against injury to feet and hands from the

cutting means.

i) Always ensure that the ventilation openings are kept

clear of debris.

4) Maintenance and storage

a) Disconnect the machine from the power supply (i.e.

remove the plug from the mains remove the disabling

device or removable battery) before carrying out main-

tenance or cleaning work.

b) Use only the manufacturer's recommended replace-

ment parts and accessories.

c) Inspect and maintain the machine regularly. Have the

machine repaired only by an authorized repairer.

d) When not in use, store the machine out

of the reach of children.

General safety warnings for the Shrub Shear:

WARNING! Read all safety warnings and all

instructions.

Failure to follow the warnings and instructions may result

in electric shock, fire and / or serious injury.

Save all warnings and instructions for future refer-

ence. The term "power tool" in the warnings refers to

your mains operated (corded) power tool or battery oper-

ated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmos-

pheres, such as in the presence of flammable liq-

uids, gases or dust. Power tools create sparks which

may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adap-

tor plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk

of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk

of electric shock.

f) If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply.

Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing

and use common sense when operating

a power tool. Do not use a power tool while you

are tired or under the influence of drugs, alcohol

or medication. A moment of inattention while operat-

ing power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing pro-

tection used for appropriate conditions will reduce per-

sonal injuries.

c) Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and / or battery pack, picking up or carry-

ing the tool. Carrying power tools with your finger

on the switch or energising power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tools may

result in personal injury.

e) Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of the

power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust col-

lection can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.

The correct power tool will do the job better and safer

at the rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and off.

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source

and / or the battery pack from the power tool

before making any adjustments, changing acces-

sories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.