- ページ 3

ペイントスプレー Gardena 11120のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena 11120 4 ページ。 1,25 l
Gardena 11120 にも：取扱説明書 (5 ページ)

ページを印刷する

GARDENA Pressure Sprayer 1.25 l

Translation of the original instructions.

Please read the operating instructions carefully and observe the notes given.

Use the instructions to familiarise yourself with the Pressure Sprayer, its proper

use and the notes on safety. For safety reasons, children under 16 as well as

persons not familiar with these operating instructions must not use the Pressure

Sprayer. Never operate the product when you are tired, ill or under the influence

of alcohol, drugs or medicine.

Read the operator's manual carefully before use and keep for future reference.

Intended use:

The GARDENA Pressure Sprayer is intended for distributing solventfree liquid

pesticides

, herbicides

, fertilisers

domestic gardens and allotments. It must not be used in public places, parks,

sport arenas, or in agriculture or forestry. Compliance with the specifications

in this operating manual is a requirement for the proper use of the Pressure

Sprayer.

According to the Plant Protection Law as well as the Detergents and Cleaning Agents Law, only

approved agents may be used (authorised specialist dealers).

Please note:

Due of the risk of physical injury, the GARDENA Pressure Sprayer must not be

used for spraying substances other than those specified by GARDENA.

Also, no acids, disinfectants or impregnators, aggressive and solventcontaining

cleaning agents, petrol or spray oil may be sprayed.

1. SAFETY

Danger of physical injuries:

Never open the Pressure Sprayer or unscrew the nozzle and the dosing cap

when the Pressure Sprayer is still pressurised. To prevent injury, never connect

the Pressure Sprayer to an aircompressor. Always hold the Pressure Sprayer

upright before the safety relief valve

When spraying insecticides, herbicides and fungicides or other liquid plant

protection products, you must comply with all special precautionary measures

specified by the manufacturer of the product you are using.

Before each opening of the Pressure Sprayer, thoroughly release

pressure by pressing the safety relief valve

DANGER! Small parts can be easily swallowed. There is also a risk that the

polybag can suffocate toddlers. Keep toddlers away when you assemble the

product.

Operation:

CAUTION: The tank may only be filled with a maximum of 1.25 litres

liquid. Inspect the Pressure Sprayer visually before each use. Never leave your

Pressure Sprayer unattended or for long periods when full and pressurised.

Keep the unit out of the reach of children. You are responsible for the safety

of others. Keep your Pressure Sprayer away from heat sources and hot

environments. Screw on the spray nozzle

(7)

(Fig. O1) is positioned correctly.

and ensure that the Oring

Cleaning:

Release the pressure after each use, empty the container, clean it carefully and

rinse with clear water. Then leave the pressure sprayer open and allow it to

dry. Do not dispose of residual fluids in the sewerage system (local disposal

systems). Always clean the Pressure Sprayer before using a different product

to avoid chemical reactions. When using several Pressure Sprayers, the tanks

and spray nozzle may not be exchanged between them. We recommend

that you have your Pressure Sprayer thoroughly inspected (preferably at

a GARDENA Service Centre) after using it for 5 years.

Storage:

Before storing, loosen the tank cap and always empty your Pressure Sprayer

completely (also after cleaning with water). Store away from frost.

Carry the pressure sprayer by the handle

Make sure that the product is protected from direct sunlight. The product may

heat up.

2. OPERATION

Please observe the safety and proportioning instructions provided by the

manufacturer of the product you are going to spray.

To spray the liquid [Fig. O1/O2/O3 ]:

1. Push the safety relief valve

(6)

(1)

2. Unscrew the spray head

or the dosing cap

3. If necessary, fill in an additive via the dosing cap

(Scale

(12)

with 10 and 20 ml).

, window cleaners

, and car wax

(6)

(Fig. O3) is pressed.

(6)

(1)

tightly by hand (do not use tools)

(13)

and not by the pump handle

(11)

and fill the container

(11)

4. Screw the spray head

4. Pump with the pump handle

5. Adjust the spray jet (clockwise rotation v spray mist; counterclockwise

rotation v spray jet) and the spray angle via the nozzle

6. Push the button

3. MAINTENANCE

To clean the pressure sprayer:

Always clean your Pressure Sprayer after spraying. Use the Pressure Sprayer

only with clear water (possibly with addition of dish detergent) and spray empty.

The valves, the suction hose and the nozzle

outer dirtying of cover and tank, thoroughly clean the area thread and thread

Oring

(7)

4. STORAGE

To put into storage:

1. Clean the pressure sprayer (see 3. MAINTENANCE).

2. Store the pressure sprayer in a frostfree place.

5. TROUBLESHOOTING

To clean the filter [ Fig. O1 ]:

v Remove the filter

Problem

Pump does not build up

pressure

Pressure Sprayer does not

spray although there is

sufficient pressure or only

sprays with a weak spray jet

It is difficult to open and

close the container

NOTE: For any other malfunctions please contact the GARDENA service

department.

6. TECHNICAL DATA

Max. capacity

Permissible working pressure

Max. permissible operating temperature

7. SERVICE / WARRANTY

In the event of a warranty claim, no charge is levied to you for the services

provided.

GARDENA Manufacturing GmbH offers a twoyear warranty (effective as of the

(3)

date of purchase) for this product. This warranty includes all significant defects

of the product that can be proved to be material or manufacturing faults.

This warranty is fulfilled by supplying a fully functional replacement product or

by repairing the faulty product sent to us free of charge; we reserve the right

to choose between these options. This service is subject to the following provi

sions: The product was used for its intended purpose as per the recommenda

tions in the operating instructions. Neither the purchaser nor a third party has

attempted to repair the product. This manufacturer's warranty does not affect

warranty entitlements against the dealer / retailer. If problems arise with this

product, please contact our Service department or send the defective product

along with a brief description of the fault to GARDENA Manufacturing GmbH,

(2)

making sure to have sufficiently covered any shipping costs and to have fol

lowed the relevant postage and packaging guidelines. A warranty claim must

be accompanied by a copy of the proof of purchase.

(1)

or dosing cap

(11)

back onto the container.

(3)

(5)

to spray the liquid.

(4)

are cleaned. In the case of

(10)

from the suction hose and clean it.

Possible Cause

(1)

(11)

Spray nozzle

or cap

too lightly screwed on.

(8)

Pump pipe

is loose.

(7)

O-Ring

is not correctly

positioned.

Sealing cap

(9)

is dirty /

defective.

(4)

Nozzle

is blocked.

(10)

Filter

is clogged.

Container pressure too high.

(4)

Remedy

(1)

v Screw on spray nozzle

(11)

or cap

on tighter.

(8)

v Screw on pump pipe

tighter.

v Check correct position of

(7)

O-Ring

v Clean / exchange sealing

(9)

cap

(4)

v Unscrew nozzle

and clean.

(10)

v Remove filter

from the

suction hose and clean it.

v Release the container pres-

sure completely by means of

(6)

the safety relief valve

1.25 l

3 bar

40 °C