- ページ 12

溶接システム Fronius TPS 4000のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Fronius TPS 4000 20 ページ。 Second earthing socket at rear
Fronius TPS 4000 にも：取付説明書 (20 ページ)

ページを印刷する

Mounting the sec-

ond earthing

socket at the rear

Mounting the second earthing socket

Threading in the cable

Connecting the cable to the front current socket

(3)

(1+9)

(g)

(8)

(k)

(j)

(i)

(h)

(8)

(3)

IMPORTANT! The recess in the current so-

cket must point downwards.

(f)

(2)

Housing

(1)

Mount the rear (-) current-socket (1),

complete with its blanking cap (9):

Insert the rear (-) current-socket

(1), working from the outside to-

wards the inside

Insert insulating washer

Screw on the hexagonal nut

Tighten the hexagonal nut with the

torque wrench, width 32

Thightening torque 35 Nm

Thread the cable (8) through the rub-

ber lead-throughs (f) and (g)

Connect the cable to the front current

socket (1):

Put the belleville spring washer (i)

over the hexagon head screw (h)

Put the star (j) over the hexagon

head screw (h)

Put the cable lug of the cable (8)

over the hexagon head screw (h)

Put the cable lug of the existing

current cable (k) over the hexagon

head screw (h)

Screw the hexagon head screw

(h) into the current socket

Tighten the hexagon head screw

(h) with the torque wrench, width

Thighting torque 15 - 35 Nm