- ページ 4
プリンター Lexmark MX310dnのPDF クイック・リファレンスをオンラインで閲覧またはダウンロードできます。Lexmark MX310dn 16 ページ。 Monochrome laser multifunction printer
Lexmark MX310dn にも: テックノート (3 ページ), 仕様 (2 ページ), 製品仕様 (2 ページ)
a
Pull the multipurpose feeder extender.
b
Pull the extender gently so that the multipurpose feeder is fully
extended and open.
2
Squeeze the tab on the left width guide, and then move the guides
for the paper you are loading.
1
2
3
Prepare the paper or specialty media for loading.
•
Flex sheets of paper back and forth to loosen them, and then
fan them. Do not fold or crease the paper. Straighten the edges
on a level surface.
•
Hold transparencies by the edges. Flex the stack of
transparencies back and forth to loosen them, and then fan
them. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the
transparencies. Be careful not to scratch them.
4
•
Flex the stack of envelopes back and forth to loosen them, and
then fan them. Straighten the edges on a level surface.
4
Load the paper or specialty media.
Notes:
•
Do not force paper or specialty media into the multipurpose
feeder.
•
Make sure the paper or specialty media is below the
maximum paper fill indicator located on the paper guides.
Overfilling may cause paper jams.