ページを印刷する
ENGLISH (Original instructions)
SPECIFICATIONS
Model
Capacities
-1
No load speed (min
)
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A)
Wear ear protection
Vibration
The
vibration
total
determined according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Steel
Wood
Wood screw
5.1 mm x 38 mm
Machine screw
High
Low
equipment
and
environmentally
compatible
) : 70 dB (A) or less
pA
value
(tri-axial
vector
2
) : 2.5 m/s
or less
h,D
2
6261D
6271D
10 mm
10 mm
21 mm
25 mm
192 mm
1.5 kg
1.5 kg
D.C. 9.6 V
D.C. 12 V
END004-3
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
its
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENE034-1
For European countries only
EC Declaration of Conformity
ENG103-3
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Driver Drill
Model No./ Type: 6261D,6271D,6281D,6381D,6391D
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
Standard or standardized documents:
EN60745
ENG202-3
The Technical file in accordance with 2006/42/EC is
sum)
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
2
6281D
6381D
10 mm
13 mm
25 mm
25 mm
5.1 mm x 63 mm
6 mm
0 - 1,300
0 - 400
200 mm
1.6 kg
1.7 kg
D.C. 14.4 V
D.C. 14.4 V
6391D
13 mm
36 mm
6 mm x 75 mm
216 mm
2.0 kg
D.C.18 V
ENG901-1
ENH101-17