ページを印刷する
4.2. Operating Instructions for Pressure Sprayer Art. No. 875 / 879 / 880
Filling the container :
P
R
4.3. General Operating Instructions for all Pressure Sprayers
(Art. No. 867/ 869 / 875 / 879 / 880)
Spraying :
U
Adjusting the spray tube :
3
1
Setting the spray jet :
V
14
1. Mix the fluid well.
2. Press the pump handle
remove the pump
3. Pour the fluid into the container up to the maximum mark
(5 litres).
Q
Please observe the safety and proportioning instructions
provided by the manufacturer of the product you are going
to spray.
4. Tighten the pump again with the pump handle
(do not use pliers).
Risk of injury !
A
V Never connect your Pressure Sprayer to an air
5. Unlock the pump handle
pump the pump repeatedly (approx. 30 - 40 times) until the
operating pressure is reached.
Any excess pressure escapes through the safety valve
The Pressure Sprayer Art. No. 879 / 880 features a window with
S
a scale
fertilisers. The window also allows you to see how much fluid is
left in the container.
S
1. Press the operating switch
The Pressure Sprayer begins spraying.
T
2. Release the operating switch
The Pressure Sprayer stops spraying.
Setting the permanent lock:
v Press the permanent lock
The operating switch
The spray tube can be swivelled 360° in the hand valve.
2
1. Unscrew the union nut
2. Turn the spray tube
3. Tighten the union nut
(do not use pliers).
You can adjust the spray jet from full jet (nozzle closed) to a fine
mist spray (nozzle open).
v Open or close the spray nozzle
you require.
P
down slightly, turn to the left and
Q
.
compressor.
P
by turning slightly to the left and
to help you measure out the appropriate dosage of
T
U
.
T
is pressed down and stays down.
1
on the hand valve
3
to the correct position.
1
on the hand valve
P
by hand
on the handle.
T
on the handle.
2
.
2
by hand
V
according to the spray jet
R
.